Votes - 3, Average rating: 3.7 ( )

Manafacture: Oster File size: 933.14 kb File name: FPSTFP4600-000_43_5187200.pdf Language of manual:

1 Using the PULSE control: You can control the texture of processed foods better by using the PULSE button on your food processor. Simply press and release to quickly turn the food processor on and off. This allows you to check processed results and control the consistency. For longer processing, continue pressing the PULSE button. 2 Using the ON (Continuous) control: Add ingredients through the feed tube; remove Figure 1 the pusher and fill the feed tube as directed (see How to Slice or Shred). Engage the pusher and press the ON button. The LED will turn on and the motor will start. Press the Pusher fi rmly down until all ingredients have passed into the work bowl. Remove the Pusher and refill ingredients as needed. Press the OFF button when fi nished. 3 Off Setting- Processor should always be in the OFF position when not in use. How To Assemble The Bowl Be sure the unit is unplugged. Put the bowl on top of the food processor base, with the work bowl handle just to the right of center. Turn the bowl clockwise until the bowl clicks into place. The handle should now be aligned with the center of the control panel. (Figure 2) Select the appropriate attachment and assemble onto food processor as directed in the chopping, kneading or slicing/shredding sections. Place food or dough in bowl if using multipurpose blade or dough blade. NOTE: There is only one position for the bowl to lock onto the base. The unit will not operate if the bowl does not lock onto the base. How to Lock the Cover Place the lid on the bowl. Turn clockwise until the lid clicks into place; the arrow on the lid will line up with the arrow on the handle (the food pusher should be positioned in the front). Your food processor features a safety interlock system. The unit will not operate unless the bowl and bowl cover are properly aligned and locked into place. (Figure 3) NOTE: When the cover is locked into position, the safety mechanism on the cover and bowl will align. The unit will not operate if the cover is not locked onto the bowl. NOTE: BOWL MUST BE LOCKED INTO BASE BEFORE COVER CAN BE LOCKED INTO POSITION. Plug unit into outlet. Turn the unit on by pressing the on button or pulse button. Use the food pusher when using the slicing or shredding discs. Press the food down slowly and steadily with the pusher. To stop your food processor, press the off button. Wait until the blade or disc comes to a complete stop before removing the lid or bowl. Figure 2 Figure 3 How to Chop NOTE: Make sure the unit is turned OFF and unplugged before use. Never use hand to push food into processor. Do not use the processor continuously for more than 3 minutes at a time. Multipurpose Blade: Use multi purpose blade for chopping, mixing, blending, pureeing and preparing puff pastry, crumbs and short crust pastry. 1 Lock the bowl onto base. (See “How to assemble the bowl”) 2 Take the disc stem and slide it onto the center post. Then grasp the multi purpose blade by its stem and slide over the disc stem. (Figure 4) 3 Place food into bowl. 4 Lock cover onto bowl. (See “How to Lock the cover”) 5 Place the food pusher into the feed tube. 6 Plug the cord into an electric outlet. Use the Food Guide to prepare food for chopping. 7 Press the ON button for continuous processing or the PULSE button for short processing tasks. When using the PULSE setting, hold down the PULSE button for Figure 4 about 2–3 seconds at a time, check results and repeat if desired. 8 When finished processing, press the OFF button and allow the chopping blade to stop rotating. 9 Twist the cover counter-clockwise to remove lid. 10 Hold the disc stem with multi purpose blade attached by its stem and remove. Unlock the bowl by turning it counter- clockwise towards the UNLOCK mark, and lift off. Empty the processed food. NOTE: The 10 Cup Food Processor comes with a spatula to easily empty contents inside the bowl. NOTE: Chopping Blade is very sharp, use caution when handling. How to Knead Dough NOTE: NEVER TRY TO PROCESS DOUGH THAT IS TOO STIFF TO KNEAD COMFORTABLY BY HAND. NOTE: Make sure the unit is turned OFF and unplugged before use. Never use hand to push food into processor. Do not use the processor continuously for more than 3 minutes at a time. Dough Blade: Use the dough blade for kneading bread dough and for mixing batters and cake mixtures. 1 Lock the bowl onto base. (See “How to assemble the bowl”) 2 Take the disc stem and slide it onto the center post. Then grasp the dough blade by its stem and slide over the disc stem (Figure 5). 3 Place all the dry ingredients into the bowl. 4 Lock cover onto bowl. (See “How to Lock the cover”) 5 Place the food pusher into the feed tube. 6 Plug the cord into an electric outlet. 7 Press the ON button for continuous processing or the PULSE button for short processing tasks. When using the PULSE setting, hold down the PULSE button for about 2-3 seconds at a time, check results and repeat if desired. NOTE: All l...

Download now

Please, enter two numbers from picture: