Manafacture: Avanti
File size: 255.94 kb
File name:
|
manual abstract
It lists causes of minor operating problems that you can correct yourself. IF YOU NEED SERVICE We're proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are some steps to follow for further assistance. FIRST, contact the people who serviced your unit. Explain why you are not pleased. In most cases, this will solve the problem. NEXT, if you are still not pleased, write all the details, including your telephone number, and send it to: Customer Service Avanti Products 10880 NW 30 Street Miami, FL 33172 USA PARTS & FEATURES 1. Temperature Control Knob 2. Ice Cube Tray (Only on models RM1700W / 1701B / 1702PS) 3. Drip Tray (Only on models RM1700W / 1701B / 1702PS) 4. Removable Shelf 5. Leveling legs 6. Chiller Compartment (Only on models RM1700W / 1701B / 1702PS) 7. Small Rack 8. Large Rack IMPORTANT SAFETY INSTRUCTIONS .WARNING. To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: • Read all instructions before using the refrigerator. • DANGER or WARNING: Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous. . . even if they will “just sit in the garage a few days.” • Before you throw away your old refrigerator: Take off the doors. Leave the shelves in place so that children may not easily climb inside. • Never allow children to operate, play with, or crawl inside the refrigerator. • Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion. • Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion. -Save these instructions- INSTALLATION INSTRUCTIONS . Before Using Your Unit • Remove the exterior and interior packing. • Check to be sure you have all of the following parts: • 1 Water Drip Tray (Only on models RM1700W / 1701B / 1702PS) • 1 Ice Cube Tray (Only on models RM1700W / 1701B / 1702PS) • 1 Shelf • 1 Instruction Manual • Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth. . Installing Your Unit • This appliance is designed to be free standing only, and should not be recessed or built-in. • Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling legs at the bottom of the unit. • Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser. • Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly. • Avoid locating the unit in moist areas. • Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. • After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment. . Electrical Connection This unit should be properly grounded for your safety. The power cord of this unit is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded. This unit requires a standard 115/120 Volt AC ~/60Hz electrical outlet with three-prong ground. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly...
Other models in this manual:Laminate Trimmers - RM1700W-11801B-2 (255.94 kb)
Laminate Trimmers - BCA1802SS-2 (255.94 kb)
Laminate Trimmers - RM1700W-1 (255.94 kb)
Laminate Trimmers - RM1701B-1 (255.94 kb)