Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
50317 1 2 3 Craftsman DeWalt DW 625 DeWalt DW 621 Hitachi M12V Hitachi TR12 Makita 3612 Porter Cable 6931 Porter Cable 7538 / 7539 Porter Cable Ryobi RE 600 7529 / 8529 © 2000-2005 Router Technologies All Rights Reserved Installation Instructions: Visit our Website @ Craftsman 27505-27506-27510-27511 -- ( 8-9-10 ) De Walt DW 625 & ELU 3337- 3338-3339 -- ( 11-12-13 ) De Walt DW 621 -- ( 14-15-16 ) Freud FT 2000 -- ( 17-18-19 ) Hitachi M12V -- ( 20-21-22 ) Hitachi TR12 -- ( 23-24-25 ) Makita 3612 Series -- ( 26-27-28-29 ) Porter Cable 6931 Plunge Base -- ( 30-31-32-33-34-35 ) Porter Cable 7538 / 7539 -- ( 36-37-38 ) Porter Cable 7529 / 8529 -- ( 39-40-41 ) Ryobi RE 600 -- ( 42-43-44 ) Ryobi RE 500 -- ( instructions available on our website ) TO AVOID CONFUSION DURING INSTALLATION follow steps 1 through 5 listed below Router Install Pages Step 1. Remove pages 2 through 7 from book Step 2. Remove your router install pages Step 3. Return extra pages to box Step 4. For smoothest plunging action purchase STP® before installation. SEE PAGE 2 Step 5. See page 3 for parts diagram Craftsman is a registered trademark of the Sears, Roebuck and Co. Corporation DeWalt is a registered trademark of the Black and Decker Corporation ELU is a registered trademark of the A.G. Corporation Freud is a registered trademark of Freud USA Ltd Hitachi is a registered trademark of the Hitachi Ltd Corporation Makita is a registered trademark of the Makita Electric Works Corporation Porter Cable is a registered trademark of the Porter Cable Corporation Ryobi is a registered trademark of the Ryobi Ltd Corporation Freud FT 2000 Page 1 METRIC EQUIVILANTS FOR INTERNATIONAL CUSTOMERS Note: The following metric drill bit or wrench sizes may be substituted for all operations other than drilling hole for #30 Dust Cover Insert. 1/8” = 0.125" 3.20mm = 0.126" 3/32" = 0.093 2.4mm = 0.094 5/32" = 0.156" no metric equivilant, this hole must be drilled to 5/32" 7/32" = 0.218" 5.5mm = 0.216" 5/16" = 0.312" 8.0mm = 0.315 21/64" = 0.328" 8.3mm = 0.326" or 8.5mm = 0.334" 1/2" = 0.500" 12.8mm = 0.503 or 13mm = 0.511 11/16"= 0.687" 17.5mm = 0.689" or 18mm = 0.708" 3/4" = 0.750" 19.0mm = 0.748 # 30 Dust Cover Insert must be 0.500" use a 12.5mm bit and sand hole to fit cover. 12.5mm = 0.492" This instruction manual covers several different makes and models of plunge routers. The instructions are written for a person with some mechanical ability. If you understand the parts and operation of a plunge router, installing the Router Raizer is not difficult. Before beginning installation compare the illustrations and photos to your router, original subbase or router table insert plate. Understand the location and function of both original and Router Raizer parts. Keep all spare parts, instruction manual and templates for future reference. Responsibility of the Owner Important: Read, understand and follow instructions to avoid personal injury. 1. The responsibility of the owner is to follow the instructions, cautions, and warnings bellow and in the instructions 2. Know and understand the location of both original and Router Raizer parts. 3. Follow all the assembly instructions carefully. 4. Correctly adjust the components making sure the plunge action is smooth and plunge lock operates properly. 5. Carefully read and follow all notes, tips, cautions and warnings. 6. Make sure all operators of the Router Raizer know how to correctly use it. Caution: Before and during installation of Router Raizer make sure power switch is in the off position and tool is disconnected from power source to avoid accidental starting of the tool which may result in personal injury. Caution: Always make sure router power switch is in the off position and disconnected from power source before and during any adjustments to the router or Router Raizer. Warning: Never remove or reinstall #31 dust cover or make any depth of cut adjustments from either end of #1 mainshaft until router power switch is off, cutting tool has completely stopped rotating and tool is disconnected from power source. Caution: Always secure plunge lock before and during routing operations. ROUTER TECHNOLOGIES LIMITED TWO YEAR WARRANTY Router Technologies warrants the Router Raizer to be free from defects in material and workmanship for a period of Two ( 2 ) Years from the original date of purchase to original owner. Our responsibility under this warranty is to replace, at no cost, any part which upon inspection at our facility is found to be defective in either material or workmanship. This warranty does not imply that the product is fit for a particular use or application, this warranty does not apply to parts which have been modified, altered, misused, damaged by improper storage. It also does not cover loss of parts during use, or mechanical adjustments which are covered in the instruction manual. In no event shall Router Technologies be liable for any indirect, incidental or consequential dam...