Login:
Votes - 3, Average rating: 3.7 ( )

User manual Cisco Systems, model 2654T6

Manafacture: Cisco Systems
File size: 767.76 kb
File name: hfricgrr.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


• How to repackage a defective chassis to return it to the factory. Where appropriate, you are referred to specific procedures in Chapter 3, “Installing the Router,”and Chapter 5, “Maintaining the Router.” This appendix contains the following sections: • Repackaging the Routers, page A-1 • Repackaging the Replaced Router Chassis, page A-24 Repackaging the Routers This section describes how to remove the entire router system from the equipment rack and repackage the router should it become necessary to transport it to another location or return it to Cisco Systems. Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide OL-17440-01 A-1 Appendix A Repackaging the Router Repackaging the Routers This section contains the following information and procedures: • The Router Shipping Package, page A-2 • Tools and Equipment, page A-6 • Safety Recommendations, page A-6 • Removing the Router from the Rack, page A-7 • Installing the Router on the Shipping Pallet, page A-16 • Completing the Repackaging, page A-23 Note You must use the original shipping package supplied by Cisco when repackaging the router. If you do not have the original system package, contact your Cisco service representative for assistance. The Router Shipping Package Figure A-1 shows the router in an exploded view of the parts making up the shipping package components. Because of the weight and height of the router, the router shipping pallet incorporates a scissor-jack platform. This scissor-jack platform enables a team of two installers to remove a fully-loaded router from the pallet and insert it into an equipment rack, or extract a fully loaded router from a rack, without removing any of the components from the router chassis. The router should be bagged to protect it against dust and electrostatic discharge (ESD) and secured to the scissor-jack platform by four anchor clips. The anchor clips are inserted into slots along the bottom edges of the router chassis side panels and secured to the scissor-jack platform by four bolts. In turn, the scissor-jack platform is secured to the shipping pallet by eight hold-down brackets that are bolted to the top of the shipping pallet. The shipping pallet consists of a U-shaped wood and foam pallet body and a wood and foam pallet front bar. The pallet front bar fastens to the open end of the pallet body to create the fourth bearing surface for the scissor-jack platform and to complete the base needed to support the walls of the shipping container. A-2 Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide OL-17440-01 Appendix A Repackaging the Router Repackaging the Routers When the router and scissor-jack platform are installed on the pallet, the router and scissor-jack platform are suspended over the well formed by the pallet body and pallet front bar. When the scissor-jack platform is expanded to lower the platform base and support the weight of the router, the bolts securing the hold-down brackets to the top of the pallet can be removed. After the brackets have been detached from the pallet, the router and scissor-jack platform can be separated from the pallet by removing the pallet front bar from the pallet body and pulling the pallet body away from the scissor-jack platform. The side walls of the shipping container are formed by two U-shaped, interlocking corrugated panels. The panels overlap to form the narrow ends of the container and are locked together by twelve plastic locking clips inserted into holes in the corrugated panels. Two foam inserts fit around the top of the router to act as a protective cushion and add rigidity to the packaging scheme by serving as a fixed buffer between the router, the corrugated side walls of the shipping container, and the corrugated top cap that holds the side walls in place. With the corrugated top cap installed, the entire shipping package is double-strapped end-to-end and side-to-side to secure the shipping container and its contents to the pallet. Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide OL-17440-01 A-3 Appendix A Repackaging the Router Repackaging the Routers Figure A-1 Router Shipping Package Components 29660 Top cap U-shaped panel Foam cap PalletAccessories package OPEN A-4 Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide OL-17440-01 Appendix A Repackaging the Router Repackaging the Routers The accessories for the router ship in five boxes that are assembled into a package. (See Figure A-2.) The accessories package is packed against the back panel of the router on the extended deck of the pallet body. Figure A-2 Router Accessories Package Corrugated spacer Top cap Cable trough Center-mount rack-mounting brackets Bottom cap Accessory box Cable trough Rack-mounting platform Foam 29661 Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide OL-17440-01 A-5 Appendix A Repackaging the Router Repackaging the Routers Tools and Equipment You need the following items to remove the rout...

Other models in this manual:
Laminate Trimmers - STEV SRT-M-66 (767.76 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category