Votes - 3, Average rating: 3
(
)
)
|
manual abstract
(1). Insert T-Screw (4) from underneath through Guide (2), Fence (1) and Washer (15). Screw Lock Knob (3) onto T-Screw (4) and tighten clockwise. Attach the other Guide using the same procedure. To attach and secure the Router Table Fence on a Router Bed, slide the two Guides (2) onto the rails on the Router Bed. (See Assy. Diagram.) Operating Instructions Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up To prevent serious injury from accidental operation: Make sure the power switch of the router or drill press is in its “OFF” position and the machine is unplugged from its electrical outlet before performing any set up procedures. After the Router Table Fence is 1. mounted to the router/drill press table top, adjust the Router Table Fence by loosening the two Adjusting Screws (3). (See Assy. Diagram.) Slide the Router Table Fence forward 2. or backward to where you need to stop your material. Then tighten the two Adjusting Screws (3) to secure the Router Table Fence in place. Always tighten both Adjusting Screws to ensure a secure connection. (See Assy. Diagram.) An additional adjustment may be 3. made to where you need to stop your material. Loosen the Knob (11) on WARNING the “C” Clamp (9). Slide the End Slide (6) to the right or left along the Fence Slides (5) to the point at which you need to stop your material. Then retighten the Knob (11) to secure the End Slide (6) in place. (See Assy. Diagram.) NOTE: 4. The End Slide (6) may be inserted in either the left or right side of the Fence Slides (5) depending upon the application. (See Assy. Diagram.) Maintenance And Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. To prevent serious injury from accidental operation: Turn the Power Switch of the router or drill press to its “OFF” position and unplug the machine from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from EQUIPMENT failure: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Inspection, Maintenance And Cleaning BEFORE EACH USE,1. inspect the general condition of the Router Table Fence. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged and any other condition that may affect its safe operation. After Use,2. clean external surfaces of the Router Table Fence with a clean, moist cloth and mild detergent. Then dry. Do not use solvents. WHEN STORING, 3. keep the Router Table Fence in a clean, dry, safe location out of reach of children and other unauthorized people. PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. WARNING PARTS LIST Part Description Q’ty 1 Fence 1 2 Guide 2 3 Lock Knob 2 4 T-Screw (1/4” x 3/4”) 2 5 Fence Slide 2 6 End Slide 1 7 Block Stop 1 8 Extension Rod 2 9 “C” Clamp 1 10 Slide Knob 4 11 Knob 2 12 Vacuum Attachment 1 13 Carriage Screw (1/4” x 20 x 3/4”) 5 14 Carriage Screw (1/4” x 20 x 1-1/4”) 1 15 Flat Washer (1/4”) 8 ASSEMBLY DIAGRAM 7 6 14 11 15 4 8 3 5 15 9 11 2 10 13 1 12 15 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness. To take advantage ...