Votes - 2, Average rating: 4.5 ( )

Manafacture: Fujitsu Siemens Computers File size: 627.9 kb File name: Language of manual:

Unsaved data is lost. Shut down all programs before you reset the Pocket-PC. 12 > Simultaneously press the Suspend/Resume button (1) and the stylus tip (2) into the soft reset opening. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Resetting Pocket PC to delivered state 123 > Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). > Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display. When you reset your Pocket PC to the delivered state, the battery switches off so that the RAM content is lost. This means: You loose all data (documents, additionally installed programs, personal settings) that you haven't saved elsewhere. Back up your data regularly (memory card, FSC Backup). If you have set a password with FSC Password and marked it as permanent, the password remains intact. i A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Using standard operating elements Using the pen > Briefly touch the desired element on the display with the stylus to trigger an action. > To activate popup menus, also touch the desired element with the stylus, however allow the stylus to rest on the element for a moment. The popup menu appears and you can select an element by touching it. Using navigation key With the navigation key (1) you scroll within the menus (up, down, to the left and right) and activate menu entries by pressing the centre of the navigation key. 1 A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Using application buttons 1 = Navigation button (N) or CONNECTMOBILITY-E2C button (C) 2 = Today button 3 = Contacts button 4 = Calendar button N C 3 4 2 1 With the application buttons and the appropriate preset (see chapter "Configuring the Pocket PC"), you can open your preferred programs and applications directly from suspend mode or from within an application. Because the application button react differently to short or long keystrokes you can assign a total of eight different programmes or applications to the application buttons. Switching display lighting off and on 1 If the ambient light conditions permit, you can switch the display lighting off or reduce its brightness to save energy. You can also specify the switching off and on again of the display lighting in the system settings of your Pocket PC (see the "Configuring the Pocket PC" chapter). > Press the Suspend/Resume button (1) for longer than 1 second to switch the display lighting on or off. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Inserting and removing expansion card A slot enables the operation of an expansion card of the type "Secure Digital I/O" or "MultiMediaCard". Observe the manufacturer's instructions when using the expansion cards. ! Never use force when inserting or removing an expansion card. Make sure that no foreign objects enter the slot. Inserting expansion card 123 > Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot somewhat. > Pull the placeholder out of the Pocket PC (2). > Carefully push the expansion card (3) into the slot. The expansion card can protrude by one to several millimetres (depending on the type of expansion card). Keep the placeholder for the expansion card in a safe place. When you remove the expansion card again, you should reinsert the expansion card placeholder. This prevents foreign matter from getting into the slot. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Removing expansion card 123 > Press on the edge of the expansion card (1) so that the expansion card jumps out of the slot slightly. > Slide the expansion card out of the Pocket PC (2). > Insert the placeholder (3) again into the slot if necessary. The placeholder protrudes one to two millimetres. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Using Pocket PC as USB Host device With the optional USB Host cable you can use your Pocket PC as a USB Host device and connect various USB devices, such as a MEMORYBIRD, to the Pocket PC. The USB Host cable is available as an accessory under the name "Sync Cable USB client/host". iYou can connect USB devices from Fujitsu Siemens Computers (e.g. MEMORYBIRD or STORAGEBIRD) immediately. If you want to connect other USB devices, ask your dealer whether drivers must be installed. The current consumption of the USB device may not exceed 100 mA (at +5 V). USB devices with a current consumption of more than 100 mA must be supplied with power via their own power supply. 1 2 > Connect the USB host cable (1) to the ActiveSync port on the Pocket PC. > Connect the USB device (such as a MEMORYBIRD) to the USB port (2) of the USB Host cable. The USB device is now connected to your Pocket PC. > If the battery charge level of your Pocket PC...

Download now

Please, enter two numbers from picture: