Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
CodeDescription2 Cool 1 Cool slightly 0 Maintain room temperature -1 Heat slightly -2 Heat ! NOTE • In this mode, you cannot adjust the fan speed, but you can set the air deflector to rotate automatically. • This function may not be supported, depending on the model. ADVANCED FUNCTIONS 15 ENGLISH Auto Changeover operation This mode changes the operation mode automatically to maintain the set temperature at ±2°C. 1 Press d to turn on the power. 2 Press f repeatedly to select the auto changeover operation. -C is displayed on the display screen. Energy saving cooling mode This mode minimizes power consumption during cooling and increases the set temperature to the optimal level for a more comfortable environment. 1 Press d to turn the power on. 2 Press f repeatedly to select the cooling operation. 3 Press b. -G is displayed on the display screen. 3 Press o or q to set the desired temperature. -The temperature range is 18°C - 30°C. 4 Press g repeatedly to select the fan speed. ! NOTE This function may not be supported, depending on the model. NOTE ! This function may not be supported, depending on the model. Display screen brightness You can adjust the brightness of the indoor unit display screen. 1 Press u repeatedly to set the brightness to the desired level. ! NOTE This function may not be supported, depending on the model. Disabling auto restart ! NOTE If you press and hold the On/Off button for 3 – 5 seconds instead of 6 seconds, the unit will switch to the test operation. In the test operation, the unit blows out strong air for cooling for 18 minutes and then returns to the factory default settings. Operating the air conditioner without the remote control You can use the On/Off button of the indoor unit to operate the air conditioner when the remote control is unavailable. However, the fan speed is set to high. 1 Open the front cover. - Lift up both sides of the cover slightly. 2 Press the On/Off button. - For cooling and heating models, the operation mode changes, depending on the room temperature. - For cooling-only models, the temperature is set to 22°C (71.6°F). Restarting the air conditioner automatically When the air conditioner is turned on again after a power failure, this function restores the previous settings. This function is a factory default setting. 1 Open the front cover. - Lift up both sides of the cover slightly. 2 Press the On/Off button and hold it for 6 seconds. - The unit will beep twice and the lamp will blink 6 times. - To re-enable the function, press the On/ Off button and hold it for 6 seconds. The unit will beep twice and the blue lamp will blink 4 times. 16 ADVANCED FUNCTIONS ENGLISH * The feature can be changed according a type of model. * The feature can be changed according a type of model. Room temp. Set temp. Operation mode Below 21°C 24°C Heating operation Above 21°C and below 24°C 23°C Dehumidifying operation Above 24°C 22°...
Other models in this manual:Air Conditioner & Split Systems - CA09AWR (1.78 mb)