Login:
Votes - 0, Average rating: 0 ( )

User manual LG, model S07LHQ

Manafacture: LG
File size: 1.98 mb
File name:
Language of manual:en
Photos and specs  LG  S07LHQ
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


4. To stop the louver at a desired angle, press again The left/right(Horizontal airflow) can be adjusted by using the remote control. 1. Press the START/STOP BUTTON to start the unit. 2. Press the HORIZONTAL AIRFLOW DIRECTION BUTTON. 3. The louvers will swing left & right automatically. 4. To stop the louvers at a desired angle, press again. Operating Instructions Vertical / Horizontal Airflow Direction Control (Optional) • By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if enjoying natural breeze. • Always use the remote controller to adjust the up and down air flow direction. Manually moving the vertical air flow direction louver by hand could damage the mechanism.When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system. NOTE CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from high to low or vice versa, depending on the ambient temperature. • In case of inverter type models where there is no AIR CIRCULATION BUTTON, air circulation can be operated by pressing the PLASMA BUTTON. NOTE This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4 times. To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator lamp(1) will blink 4 times. NOTE Air Circulation Mode This function is useful in the situation of power failure. When power regains after a failure this feature restore the previous operating condition and the air conditioner will run in the same settings. Auto Restart Function Owner's Manual 17 Maintenance and Service Indoor Unit Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and unplug the power cord. Clean the unit with a soft dry cloth. Do not use bleach or abrasives. Never use any of these • Water hotter than 40°C. It may cause deformation and discoloration. • Volatile substances. They may damage the surface of the air conditioner. Air Filters The air filters behind the front panel / grill should be checked and cleaned once in every 2 weeks or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters with a vacuum cleaner or warm soapy water. If dirt is not easily removed, wash with a solution of detergent in luke warm water. Dry well in shade after washing and reinstall the filters back in place. Plasma Filters The plasma filters behind the air filter should be checked and cleaned once in every 3 months or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters with a vacuum cleaner. If it is dirty wash it with water and dry well in shade an install back in place. Deodorizer Filters, Virus & Allergy Filters (Optional) Remove the deodorizer filters behind the air filter and expose them in direct sunlight for 2 hours. And then insert these filters into original position. Removal of Filters Maintenance and Service Gasoline Powder ENGLISH 1. Art Cool Type : Pull down the grille bottom, after lifting out the filter tab a bit and take the filter out slowly. Remove the plasma filter as shown. After cleaning and drying well reinstall the filter and grille by matching the hook. 2. Art Cool Type Wide : The procedure of removal of filters is same as in Art Cool Type model as shown above. Don't touch this plasma filter within 10 seconds after opening the inlet grille, it may cause an electric shock. Air filter Front panel hook Hookhanger Air filter Plasma filter Front panel 18 Room Air Conditioner Maintenance and Service 3. Deluxe (Type 1): Open the upside of the panel and lift it up as shown. The hooks of the panel will come off. Remove the air filters. Then pull out the plasma filter Front panel Panel hook Plasma filter Plasma filter Front panel 5. Standard Split Type : Two different methods to open the front panel based on types of air conditioner as below ; Type 1: Open the front panel as shown. Then pull the filter tab slightly forward to remove the air filter. After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward. How to use the front panel 1. Front panel closing Move the link upward and close the front panel. 2. Front panel removing Raise the link up to hook hanger and remove front panel forward. Plasma filter Deodorizer filter Plasma filter Virus & Allergy filter 4. Deluxe (Type 2): Open the front panel as shown. Then pull the filter tab slightly forward to remove the air filter. After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward. After cleaning and drying well reinstall the filters in t...

Other models in this manual:
Air Conditioner & Split Systems - S07PK (1.98 mb)
Air Conditioner & Split Systems - S09LHQ (1.98 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category