Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Reattach the cover by sliding it back into position. NOTES: • Use 2 AAA(1.5volt) batteries. Do not use rechargeable batteries. Signal Receptor Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.) Operation Indication Lamps On/Off : Lights up during the system operation. Sleep Mode : Lights up during Sleep Mode Auto operation. Timer : Lights up during Timer operation. Defrost Mode : Lights up during Defrost Mode or Hot Start operation.(Heat pump model only) Outdoor unit operation : Lights up during outdoor unit operation. (Cooling model only) Temperature : Indicate the setting temperature. OUT DOOR About the remote control on the system The remote control transmits the signals to the system. Features of the Remote Control 1 START/STOP BUTTON Operation starts when this button is pressed and stops when the button is pressed again. Signal transmitter OPERATION MODE SELECTION BUTTON Used to select the operation mode. Flip-up door (opened) PLASMA ON OFF SET CANCEL 6 1 3 5 4 10 11 12 13 7 8 9 2 2 3 4 5 6 7 8 ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. INDOOR FAN SPEED SELECTOR Used to select fan speed in four steps low, medium, high, or CHAOS. JET COOL/HEAT Used to start or stop the speed cooling or heating. (Speed cooling/heating operates super high fan speedineachmode.) CHAOS SWING BUTTON Used to stop or start louver movement and set the desired up/down and right/left airflow direction. ON/OFF TIMER BUTTONS Used to set the time of starting and stopping operation. 9 TIME SETTING BUTTONS Used to adjust the time. (See page 12) TIMER SET/CANCEL BUTTONS Used to set the timer when the desired time is obtained Cooling Operation Auto Operation Healthy Dehumidification Operation Heating Operation • Cooling Model( ), Heat Pump Model( ) 10 11 12 13 Operation Mode ENGLISH and to cancel the Timer operation.(See page 12) SLEEP MODE AUTO BUTTON Used to set Sleep Mode Auto operation.(See page 12) AIR CIRCULATION BUTTON Used to circulate the room air without cooling or heating (turns indoor fan on/off).(See page 13) ROOM TEMPERATURE CHECKING BUTTON Used to check the room temperature. RESET BUTTON Used prior to resetting time or after replacing batteries. 5 How to use the Operation Mode Selection button Cooling Operation 6 Safety PrecautionsCare and MaintenanceTroubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions Cooling Healthy Dehumidification Auto Heating (Heat pump model only) To raise the temperature To lower the temperature Press the Start/Stop button. The unit will respond with a beep. Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shiftedinthe directionofthe arrow. Close the door on the remote control. Set the temperature lower than the room temperature. The temperature can be setwithinarangeof18°C~30°Cin1°C increments. Set the fan speed again with the door of the remote control still closed. You can select the fan speed in four steps- low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. 1 2 3 4 Natural wind by the CHAOS logic . For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic. Auto Operation Cooling Healthy Dehumidification Auto Heating (Heat pump model only) To raise the temperature To lower the temperature Press the Start/Stop button. The unit will respond with a beep. Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you want to change the set temperature, close the door on the remote control and press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will then be changed automatically. During Auto Operation: . You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule. . If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be done by manually resetting. . During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the chaos swing button again. 1 2 3 ENGLISH 7 Healthy Dehumidification Operation 8 Safety PrecautionsCare and MaintenanceTroubleshooting Tips Care and Maintenance Operating Instructions Safety Precautions Cooling Healthy Dehumidification Auto Heating (Heat pump ...
Other models in this manual:Air Conditioner & Split Systems - LS-P1260BM (1.15 mb)