Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 3.29 mb File name: Language of manual:

Warning! When you turn the appliance back on again after emptying all of the water, do not forget to replace the removable tank on the appliance properly. Should you fail to do so, the symbol will not disappear from the screen and the appliance will not work. Remember that when the appliance is turned off, it is necessary to wait for approximately 3 minutes before the compressor starts up again. This period of time is required in order to ensur e correct appliance operation. 57 In this operation function, the appliance reduces the humidity in the atmosphere. The appliance purifies the air in the room at the same time in order to create a pleasant atmosphere. • Plug the appliance into the mains electricity supply. • Fit the hot air expulsion tube outside as indicated in "Preparing the appliance before use". • Lift the air director on the top of the appliance. There are two ways of expelling condensed water: via the removable tank and in continuous mode. Dehumidification via the removable tank: • Check that the removable tank is fitted onto the appliance properly and that the plug is fitted onto the water drainage pipe to prevent water from leaking onto the support surface. • When the water in the removable tank reaches a certain level, the appliance beeps twice. The removable tank full symbol appears on the screen at the same time to indicate that the tank needs to be emptied. The appliance stops working when this happens. The symbol also appears and the appliance beeps when the removable tank is not properly fitted into its housing. • In both events, it is necessary to extract the tank and pour the water carefully down the nearest drain. Dehumidification in continuous mode: • Place a receptacle at the end of the water drainage pipe to collect the condensed water or lead the pipe to the nearest drain. • Remove the plug from the water drainage pipe on the back at the bottom of the unit. The appliance does not stop working in this mode. It does not beep or display the symbol when the extern a l receptacle is full. In this operation function, the appliance reduces the humidity in the atmosphere. The appliance purifies the air in the room at the same time in order to create a pleasant atmosphere. • Plug the appliance into the mains electricity supply. • Fit the hot air expulsion tube outside as indicated in "Preparing the appliance before use". • Lift the air director on the top of the appliance. There are two ways of expelling condensed water: via the removable tank and in continuous mode. Dehumidification via the removable tank: • Check that the removable tank is fitted onto the appliance properly and that the plug is fitted onto the water drainage pipe to prevent water from leaking onto the support surface. • When the water in the removable tank reaches a certain level, the appliance beeps twice. The removable tank full symbol appears on the screen at the same time to indicate that the tank needs to be emptied. The appliance stops working when this happens. The symbol also appears and the appliance beeps when the removable tank is not properly fitted into its housing. • In both events, it is necessary to extract the tank and pour the water carefully down the nearest drain. Dehumidification in continuous mode: • Place a receptacle at the end of the water drainage pipe to collect the condensed water or lead the pipe to the nearest drain. • Remove the plug from the water drainage pipe on the back at the bottom of the unit. The appliance does not stop working in this mode. It does not beep or display the symbol when the extern a l receptacle is full. • Select the dehumidification function Instructions for Use Dehumidification (see "Selecting the operation function"). • Select the operation speed, (see "Selecting the speed"). Warnings The amount of water dehumidified may vary depending on ambient conditions (See “Technical Information”). When the appliance is operating in the dehumidification function, the temperature does not appear on the screen and cannot be selected or modified. Warning! Do not forget to replace the plug onto the water drainage pipe when you change function, otherwise the appliance will shed water when operated. Remember that ambient temperature must be 18.C or higher in order for the appliance to work. The appliance expels hot air through the drainage pipe when operating in dehumidification function. This is necessary for the appliance to work more efficiently in this operation function. In this operation function, room temperature rises slightly. Air purification The air inside the room (ventilation) is circulated through a purifying system (air purification) when the appliance is set to this function. The appliance comes with a basic filter (already fitted on the appliance) and a double active filter to be fitted by the user, see “Fitting the purifying filter (double active)”, against: The standard appliance is fitted with a basic filter and a double active filter (see "Cleaning and Mainten...

Download now

Please, enter two numbers from picture: