Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Wall mount with screws and wall plugs, used for hanging the outdoor unit. 17. Protective sleeve to protect the flexible duct when it passes through a wall. 18. Copper valve cover used when the pipe has been disconnected from the indoor unit. (only on model AA4030) 19. Protective hood for the flexible pipe coupling (only on model AA4030) Our goods come in optimised packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal service as secondary raw materials. When the appliance has reached the end of its useful life, unplug it from the mains supply and cut the connection cable off. The appliance contains refrigerants which will have to be disposed of in accordance with the regulations in force. Do not dispose of your appliance yourself. Get in touch with your local council or other competent body for information about how best to dispose of it. BEFORE SWITCHING THE APPLIANCE ON - Read the instruction book before using the appliance for the first time. It contains important information, not only concerning use but also safety aspects and maintenance. -Keep this instruction book safe, Another user may find it useful. -Never switch on an appliance that is damaged. -Setting-up and connecting your appliance must be done in accordance with the assembly instructions and regulations in force. If these instructions are not followed then the guarantee may be made void. -Our appliances comply with current safety regulations. Only technicians qualified in such matters are permitted to repair them. Your safety is at stake. -Make sure that the water drain caps (fig. A,10 and 13) are fitted on securely, as they may have come loose during shipment. CONDITIONS FOR USE -This electrical appliance must be connected to a mains supply of 220/240 V, 50 Hz, through a socket with an earth connection. AA4010/4030/8010 12 13/9/04, 11:57 -It must be protected with a 10 A slow-action fuse to the model AA4010 - AA4030 and 16 A to the model AA8010 (See characteristics table at the end). -Should it be necessary to use an extension lead, this will have to a minimum wire gauge of 1.5 mm2 per terminal, be fitted with an earth wire and be no longer than 25 m. -There is a compartment at the rear of the appliance used for storing the mains cable. -Do not let water get inside the appliance. -Do not cover the air intakes or outlets on your appliance. -If the mains cable becomes damaged it will have to be replaced. To do this, get in touch with the manufacturer, after-sales service dept. or someone similarly qualified. Attention! This apppliance is not suitable for dehumidification at ambient temperatures of below 18°C. This apppliance is not suitable for dehumidification at ambient temperatures of below 18°C.This apppliance is not suitable for dehumidification at ambient temperatures of below 18°C.This apppliance is not suitable for dehumidification at ambient temperatures of below 18°C.This apppliance is not suitable f...
Other models in this manual:Air Conditioner & Split Systems - AA4010/02 (2.33 mb)
Air Conditioner & Split Systems - AA4010/03 (2.33 mb)
Air Conditioner & Split Systems - AA4010/04 (2.33 mb)
Air Conditioner & Split Systems - AA4010/05 (2.33 mb)