|
manual abstract
Prevent electric shock by switching off the power supply and unplug when: - Before cleaning or servicing. - Extended non-use. - Abnormally strong lightning activity. ENGLISH CAUTIONCAUTION INDOOR UNIT AND OUTDOOR UNIT Do not wash the indoor unit with water, benzene, thinner or scouring powder to avoid damage orcorrosion at the unit. Do not use for preservation of preciseequipment, food, animals, plants, artworkor other objects. This may cause quality deterioration, etc. Do not use any combustible equipment in front ofthe airflow outlet to avoid fi re propagation. Do not expose plants or pet directly to airfl ow to avoid injury, etc. Do not touch the sharp aluminium fin, sharp parts may cause injury. Do not switch ON the indoor unit when waxingthe floor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas toprevent damage to the unit. Do not dismantle the unit for cleaning purpose toavoid injury. Do not step onto an unstable bench whencleaning the unit to avoid injury. Do not place a vase or water container on theunit. Water may enter the unit and degrade the insulation. This may cause an electric shock. Do not open window or door for long time duringCOOL/DRY mode operation. Ensure drainage pipe is connected properly andkeep drainage outlet clear of gutters, containersor does not immersed in water to prevent waterleakage. After a long period of use or use with anycombustible equipment, aerate the roomregularly. After a long period of use, make sure theinstallation rack does not deteriorate to preventthe unit from falling down. REMOTE CONTROL Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. • New batteries of the same type must be inserted following the polarity stated. POWER SUPPLY Do not pull the cord to disconnect the plug toprevent electric shock. REMOTE CONTROL Maximum distance: 8m Human activitysensor and indicator POWER TIMER ECONAVI AUTO COMFORT NANOE-G POWERFUL/QUIET Indicator (Green) (Orange) (Green) (Green) (Blue) (Orange/ Green) Sunlight sensor and remote control receiver Remote Control display AUTOCOMFORT MODE POWERFUL/QUIET TEMP OFF/ON NANOE-G TIMER SET CANCEL ON OFF 1 2 3 AIR SWINGFAN SPEED SET CLOCK RESET FANSPEED AIRSWING AUTOHEATCOOLDRY ECONAVI 3 9 6 2 5 1 8 4 7 Press the remote control’s button 1 TO TURN ON OR OFF THE UNIT POWER • Please be aware of the OFF indication on the remote control display to prevent the unit from starting/stoppingimproperly. 2 TO SET TEMPERATURE • For heat, cool and dry modes, the range of temperaturefor selection is 16°C ~ 30°C. • Operating the unit within the recommended temperaturecould induce energy saving. HEAT mode : 20°C ~ 24°C. COOL mode : 26°C ~ 28°C. DRY mode : 1°C ~ 2°C lower than room temperature. 3 TO SELECT OPERATION MODE AUTO mode - For your convenience • Unit selects the operation mode according to the room temperature. • Once auto mode is selected, the unit will operate at thestandard setting temperature. Room temperature Operation mode Standard setting temperature 23°C & above Cool 25°C Below 23°C Dry 22°C Below 20°C Heat 21°C • Press for “HI” to +2°C or for “LO” to -2°C to the standard setting temperature. HEAT mode - To enjoy warm air • Unit takes a while to warm up. The power indicator blinks during this operation. COOL mode - To enjoy cool air • Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentle coolingoperation. 4 TO SELECT FAN SPEED (3 OPTIONS) FAN SPEED • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. ENGLISH8 9 TO MONITOR HUMAN PRESENCE & ACTIVITY FOR ENERGY SAVING & COMFORT 5 TO ADJUST AIRFLOW DIRECTION (5 OPTIONS) 8 9 TO MONITOR HUMAN PRESENCE & ACTIVITY FOR ENERGY SAVING & COMFORT 5 TO ADJUST AIRFLOW DIRECTION (5 OPTIONS) AIR SWING • Keeps the room ventilated. • In COOL/DRY mode, if AUTO is set, the louver swing left/right and up/down automatically. • In HEAT mode, if AUTO is set, the horizontal louver fi x at predetermined position. The vertical louver swing left/right after the temperature rises. 6 TO PURIFY THE AIR NANOE-G • Removes/deactivates harmful micro-organisms such asviruses, bacteria, etc. • Can be activated even when the unit is turned off. In this condition, fan speed and air swing cannot be adjusted. • nanoe-G starts automatically with the unit switched on OFF/ON with . 7 TO SWITCH BETWEEN POWERFUL & QUIET POWERFUL/POWERFUL QUIET NORMAL QUIET POWERFUL TO REACH TEMPERATURE POWERFUL QUICKLY • This operation will stop automatically after 20minutes. QUIET TO ENJOY QUIET QUIET OPERATION • This operation reduces airfl ow noises. To optimize energy ECONAVI ECONAVI saving AUTO AUTO COMFORT To maximize comfort COMFORT Heat S...
Other models in this manual:Air Conditioner & Split Systems - 24NKD (2.23 mb)