Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
2 If the is not displayed at the top of the remote control, press the button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the button. The air conditioner runs in HEAT mode. Notte You can change modes at any time. 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 16°C and 30°C inclusive. Result: Each time you press the button: - The temperature is adjusted by 1°C - The indoor unit beeps The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C). If the room temperature reaches the set temperature, the air conditioner stops heating, but the fan is still operating. 4 Select the fan speed by pressing the button one or more times until the required setting is displayed: Automatic (rotated : ) Low Medium High Result: Each time you press the button, the indoor unit beeps. For the first three to five minutes, the fan operates very slowly until the air has been sufficiently warmed. Once the correct temperature has been reached, the fan is automatically set to the required speed. 5 To control the direction of the air flow, refer to page 17. IMPORTANT Changing the Room Temperature Quickly E-12 The Turbo cooling/heating function is used to cool or heat your room as quickly as possible. E EEEEx xxxxa aaaam mmmmp ppppl lllle eeee : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 Press the button. Result: The temperature and fan settings are adjusted automatically. The air conditioner cools or heats the room as quickly as possible. . After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the button again. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 4 To control the direction of the air flow, refer to page 17. Removing Excess Humidity E-13 ENGLISH If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. The air conditioner is fitted with...
Other models in this manual:Air Conditioner & Split Systems - AQ07P8GE/FES (1.51 mb)
Air Conditioner & Split Systems - AQ07P8GE/ROD (1.51 mb)
Air Conditioner & Split Systems - AQ07PBGE (1.51 mb)
Air Conditioner & Split Systems - AQ09P8GE (1.51 mb)