Votes - 4, Average rating: 3.8 ( )

Manafacture: Casio File size: 1.9 mb File name: Language of manual:

• Pressing METRONOME again restarts the metronome sound using the current beat and tempo setting. • If you want to change both the tempo and the beat before restarting the metronome, perform the above procedure here. .NOTE . • You can change metronome beat and tempo settings at any time, even while the metronome is sounding. • You can also use the metronome in combination with memory play. See the section of this User’s Guide covering the function for details. Adjusting the Metronome Volume Use the following procedure to increase and decrease the volume of the metronome beat. To adjust the metronome volume While holding down the CONTROL button, press the keyboard key that corresponds to the metronome volume setting you want to select. • A note does not sound when you press a keyboard key while holding down CONTROL. • You can set a value from 1 to 3. .NOTE . The metronome volume is automatically set to 2 whenever you turn on piano power. E-15 AP31/33_E_10_15.p65 Page 15 03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC Using the Memory This section describes how to record keyboard play to memory and playback data from memory. About the Memory Memory Capacity Memory can hold up to 2,500 notes (one song). • Recording stops automatically and the indicator above the RECORD button goes out whenever memory becomes full. Recorded Data The following is a list of the data that can be recorded in memory once recording starts. • Anything you played on the keyboard (Received MIDI data is not recorded.) • Tone settings and any tone setting changes • Beat setting used during recording • Pedal operations Recorded Data Storage This piano has a lithium battery to supply power to retain memory contents even while power is off.* The life of the lithium battery is five years after the date of manufacture of the piano. Be sure to contact your CASIO dealer about having the lithium battery replaced every five years. * Never turn off CELVIANO power while a record operation is in progress. IMPORTANT! • Recording new data to a song memory area automatically deletes any data previously stored in that song memory area. • Turning off power while a record operation is in progress deletes anything recorded up to that point. • CASIO shall not be held responsible for any losses by you or any third party due to loss of data caused by malfunction or repair of this piano, or by battery replacement. Recording To record notes from the keyboard . PREPARATION . • Select the tone and effects you want to start with. • If you want to use the metronome during recording, start the metronome. Use the procedure under “Using the Metronome” on page E-15 to set the beat and the tempo. 1. Press the RECORD button to put the piano into record standby. • The indicator above the RECORD button flashes. • You can also change the metronome’s beat setting at this time. • If you want the metronome to sound while you are recording, press the METRONOME button here to start the metronome. 2. Play something on the keyboard to start recording. • When you start recording, the indicator above the RECORD button stops flashing and remains lit. • What you play sounds from the speakers and is recorded into memory. • You can also start recording by pressing the START/ STOP button. In this case, blank space is inserted in memory from the point that you press the START/ STOP button up to the point you start to play on the keyboard. 3. After you are finished recording, press the START/ STOP button to stop the record operation. • At this time the indicator above the RECORD button goes out. • To stop the metronome, press the METRONOME button. • Here you can press the START/STOP button and playback the data you just recorded. E-16 427B-E-020A AP31/33_E_16_20.p65 Page 16 03.10.7, 11:00 AM Adobe PageMaker 6.5J/PPC Playback Use the following procedure to play back from memory. To playback from memory 1. If you want the metronome to sound during playback of your recording, hold down the CONTROL button and press keyboard key B3 to turn on the metronome. C4 Setting Range B3 (black key): Metronome OFF B3: Metronome ON • Using the metronome comes in handy, for example, when you want to record the left-hand part and then practice the right hand-part while playing back. 2. Press the START/STOP button to start playback. • If you turned on the metronome in step 1, the metronome sounds during playback. • You can toggle the playback metronome sound on and off by pressing the METRONOME button. • Playback stop automatically when the end of the tune is reached. • To stop part way through, press the START/STOP button. • To stop the metronome, press the METRONOME button. .NOTE . • You can change the playback tempo while playing back from memory. • You cannot change the tone when playing back from memory. Deleting Memory Contents IMPORTANT! The delete operation cannot be undone. Make sure you play back memory contents and confirm that you no longer need it before performing the following procedure. To delete me...

Download now

Please, enter two numbers from picture: