Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
This Use and Care Manual provides information necessary for the proper care and maintenance of your new Room Air Conditioner. If properly maintained, your air conditioner will give you many years of trouble free operation. To avoid installation difficulties, read these instructions completely before installing/operating your unit. NOTE: This unit is NOT designed for through-the-wall installation. For easy reference, you may want to attach a copy of your sales receipt to this page. Note following information provided (on the manufacturer’s nameplate located on the right side of the unit above the power cord). This information will be needed when you contact a Customer Service Representative. Model Number: PAC5277EE_ Serial Number: _ Date of Purchase: Dealer’s Name and Address: Refer to the trouble shooting section of this Use and Care Manual if the unit is not operating correctly. If these suggestions do not solve the problem, contact an authorized service representative or call Danby TOLL FREE: 1-800-26-Danby CAUTION A Keep these instructions for future reference. This symbol denotes a caution or warning Do not leave a room air conditioner unattended in a space where people or animals who cannot react to a failed unit are located. A failed unit can cause extreme overheating or death in such an enclosed, unattended space. Model No. Unit Specificafications Voltage DAC5277EE 115V/60Hz Cooling Capacity (Btu/h) 5,250 Input Wattage 490 Energy Efficiency Rating (EER) 10.7 Fan/Cooling Speeds 3/3 Cooling Area Coverage 175Sq.ft (16.3m2) Noise Level (dB) 54 Unit Dimensions Width 17.75” (45.1cm) Depth 16” (40.6cm) Height 12.75” (32.4cm) Window Kit Dimensions Maximum Width 38” (96.5cm) Minimum Width 21.5” (54.6cm) Minimum Height 14.5” (36.8cm) Shipping Weight 65lb (29.5Kg) NOTE: Specifications are subject to change without notice for further improvement. 2 Electrical Specifications t Ail wiring must comply with local and national electrical codes and must be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician. 2 Check available power supply and resolve any wiring problems BEFORE installing and operating this unit. 3 This 115V air conditioner uses 12.0 or less nameplate amps and may be used in any properly wired, general purpose household receptacle. See Table 1 for specifications for individual branch circuit. 4 For your safety and protection, this unit is grounded through the power cord plug when plugged into into a matching wall outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualified electrician. 5. The wall outlet (3-pin) must match the plug (3-pin) on the service cord supplied with the unit. DO NOT use plug adapters. See Table 2 for receptacle and fuse information. If it is necessary to use an extension cord to connect your air conditioner, use an approved "air conditioner" extension cord only, (available at most local hardware stores) 6. The rating plate on the unit contains electrical and other technical data. The rating plate is located on the right side of the unit, above the power cord. Table 1: Suggested Individual Branch Circuit Nameplate Amps AWG Wire Size* _5.0 to 12_16_ AWG- American Wire Gage * Based on copper wire at105°C temperature rating. Table 2: Receptacle and Fuse Types Rated Volts 125 Amps 13 Wall Outlet () vly Fuse Size 15 Time Delay Fuse Plug Type (or circuit breaker) A Important Safety Instructions A The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce the risk of fire.Please refer to the section “ Power Supply Cord”for details.In the event the power supply cord is damaged,it cannot be repaied it must be replaced with a new cord from the Product Manufacturer. •Under no circumstances should this device be used to turn the air conditioner on or off. •The ‘RESET1 button must always be pushed in (engaged) for correct operation. •The power supply cord must be replaced if it fails to reset when the ‘TEST’button is pushed in. • If the power supply cord is damaged, it cannot be repaired.lt must be replaced with a new cord obtained from the Product Manufacturer. Power Supply Cord The power cord supplied with this air conditioner contains a device that senses damage to the power cord.To test if your power supply cord is working properly . you must do the following; 1 .Connect the power supply cord to an electrical outlet. 2.The power supply cord is inclusive of two buttons located on the head of the plug. One button is marked ‘TEST’, the other button is marked’RESET’. Press the ’TEST’ button,you will hear a click as the ‘RESET’ button pops out. 3.Press the ‘RESET’ button, you will hear a click as the button engages. 4.The power supply cord is now energized and supplying electricity to the air conditioner.(On some products this is also ...