Votes - 3, Average rating: 5 ( )

Manafacture: Panasonic File size: 204.78 kb File name: PAC8000S_ownersmanual.pdf Language of manual:

13). The compressor is not on. The compressor may take up to 3 minutes to turn on, or longer if it is too warm. The ambient temperature is too high. Lower the room temperature to be below 90°F degrees. The filter may be dusty or blocked. Clean the filters. (pg. 16) Blocked exhaust port. Remove any obstructions in the exhaust hose and port. My air conditioner blows cold air, but does not lower the room temperature. The unit is not vented. The unit must be vented. (pg. 4) The area of the room is too large. Minimize the size of the area to be cooled, i.e. adding a drop ceiling. Use more than one unit to cool the area, or use a larger unit. Open windows and doors. Close any open doors and windows. Too many heat sources. Remove or shut off additional heat sources such as radio equipment, servers, etc. The room/garage may be inadequately insulated. Properly insulate the room to be cooled, i.e. using fiberglass. The ambient temperature is too high. The unit may not work if the room temperature is above 90°F. Direct sunlight is heating the room. Close curtains or pull down blinds, and minimize the direct sunlight into the room. The filter may be dusty or blocked. Clean the filter and replace it if needed. Dirty condenser coils. Carefully vacuum the coils clean. Obstructed air intake or exhaust ports. Remove anything blocking the ports. NOTE: If the ambient temperature is above 90°F the unit may not blow cold air. TIP: Run the unit before it is needed. For example, run the unit in the morning before the area gets hot, and continue to run the unit all day long in order to maintain a low temperature. 19 Specifications Description of product Portable Air Conditioner Model PAC8000S Voltage/Frequency AC 115V~60Hz Input Power 800W Current 6.7A Color Silver Dehumidifying capacity 71 Pints/Day Coolant R22 Timer 24 Hour Dimensions WxHxD 19 1/4” 24 3/4” x13 1/4” Weight 53 lbs KoldFront Portable Air Conditioner 20 EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as follows: WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange the defective product with a new, refurbished, or remanufactured product. If a product is replaced, it will carry the remaining warranty of the original product. After the ninety (90) day period, EdgeStar will no longer be responsible for labor charges incurred. All defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to an EdgeStar authorized repair facility. PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free of charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or products will be new, remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service become the property of EdgeStar. This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the product under normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product in residential settings within the United States of America. WHAT IS NOT COVERED: The following limitations apply to the coverage of this warranty. This warranty does not cover: . Labor charges for installation, setup or training to use the product. . Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any damaged caused by improper voltage or any other misuse, including abnormal service, handling, or usage. . Cosmetic damage such as scratches and dents. . Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, cartridges, batteries. . Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product. . Damages or operating problems resulting from misuse, abuse, operation outside environmental specifications, uses contrary to instructions provided in the owner’s manual, accidents, acts of God, vermin, fire, flood, improper installation, unauthorized service, maintenance negligence, unauthorized installation or modification, or commercial use. . Labor charges incurred 91 days or more after the date of original purchase. . The use of EdgeStar products in commercial settings. . Optional accessories, attachments, and appearance items. . Products that have been modified to perform outside of specifications without the prior written permission of EdgeStar. . Products lost in shipment, or theft. . Products sold AS IS or from an unauthorized reseller. . Prod...

Download now

Please, enter two numbers from picture: