Votes - 2, Average rating: 4 ( )

Manafacture: DENSO CORPORATION File size: 1.08 mb File name: movincool-officepro12.pdf Language of manual:

Any preset program will be retained in the memory in the event power loss occurs. 9) A programmable Clock/Timer function. This allows the user to program a specific time and day that the unit will begin to operate/start and turn off/end (Automatic Operation). .. Not available for OP 12 Model. 13 OPERATION Control Panel Before operating the unit, it is important to familiarize yourself with the basic controls located on the control panel. 1 2 3 MOTU WE TH FR SA SU START STOP RUN/ SET CLOCK FAN STOP COOL PROGRAM ON LOCKED SET TEMPON PM HI F F LO OFF ROOM TEMP AM FAN MODE HI/LO ON/OFF COOL MODE SET TEMP TANK FULL PROGRAM SET PROG CLOCK ENTER PROGRAMMING C C 7 6 8 5 4 1) COOL Mode Button Activates/deactivates the COOL mode/turns the unit off. 2) FAN Mode Button Activates/deactivates the HIGH, LOW, and OFF fan speed. 3) SET TEMP Button ( / ) Temperature Scale Illuminates to indicate the current LED temperatures being displayed are either in °C or °F ; also displays the clock when programming. 4) ENTER Button Press to select set up value 5) SET CLOCK Button To set clock (day and time) 6) SET PROG Button To set or view program 7) RUN/STOP Button Activates/deactivates program(s) 8) TANK FULL LED Flashes when the drain tank is full. 14 OPERATION (cont.) Control Panel (Cont.) LCD Indicators 9 14 11 15 12 16 13 19 10 17 18 9) MO...SU 10) °C or °F Temperature displayed in either Fahrenheit or Celsius (See Note) 11) AM/PM Illuminates to indicate AM or PM time of day. 12) PROGRAM Blinking during program editing mode. 13) PROGRAM ON Illuminates to indicate program is running. 14) START Illuminates to indicate program start time. 15) STOP Illuminates to indicate program stop time. 16) CLOCK Illuminates to indicate clock status. 17) FAN HI/LO Illuminates to indicate selected fan speed. 18) COOL ON/OFF Illuminates to indicate cool on or off. 19) LOCKED Illuminates to indicate key lock up. NOTE : ROOM TEMP display range from 16°F to 109°F (-9°C to 42°C) In Fahrenheit only, when display values is greater than 99°F, it will display values of +0F (for 100°F), +1F (for 101°F) and +9F (for 109°F) Illuminates to indicate selected day...... of the week...... 15 OPERATION (cont.) Set Clock Prior to operating the Office Pro 12, 18, or 24 users should set the clock of the controller to the correct time as shown in the following steps : 1) Press and hold the SET CLOCK button for 3 seconds or until beep. (LCD will indicate blinking “CLOCK” and blinking “Day of the week ”) 2) Press SET TEMP buttons to select day of the week. 3) Press ENTER button to set Hour. Step 1 & 6 4) Press SET TEMP buttons to select desired hour. Step 2 to 5 5) Press ENTER button to set Minute. 6) Press SET TEMP buttons to select desired minute. Press SET CLOCK button to exit set clock mode. NOTE: User should check clock periodically to confirm clock accuracy. Operating in COOL Mode 1) The unit can be operated in COOL mode by pressing the COOL ON/OFF button (LCD indicates COOL ON). NOTE : In COOL mode the unit can only be turned off by pressing the COOL ON/OFF button again, not by pressing the fan buttons. 2) Change the fan speed by pressing the fan HI/LO button. 3) Change the temperature set point by pressing the SET TEMP MOTU WE TH FR SA SU START STOP CLOCK FAN COOL PROGRAM ON LOCKED SET TEMP HI LO ON OFF ROOM TEMP AM PM F F F AN MODE HI/LO ON/OFF COOL MODE SET TEMP TANK FULL PROGRAM RUN/ STOP SET PROG SET CLOCK ENTER PROGRAMMING C C buttons ( / ). NOTE : When turning the unit on, the set point and fan speed are determined by the last operating mode. (program mode not included). Operating in Fan Only Mode 1) The unit can also be operated in Fan Only mode by pressing fan HI/LO button (LCD indicates FAN HI/LO and COOL OFF). 2) The unit can then be turned off by pressing the fan HI/LO button until fan turn off (Fan only mode speed sequence are HI>LO>OFF) Changing from Fan Only Mode to COOL Mode The COOL mode can be activated while the unit is operating in Fan Only mode. To do this, simply press the COOL ON/OFF button (LCD indicates COOL ON). NOTE : The Fan Only mode will not operate after the COOL mode has been activated. After the COOL mode has been activated, the unit cannot be turned off by pressing the fan buttons. The COOL ON/OFF button must be pressed. 16 MOTU WE TH FR SA SU START STOP CLOCK FAN COOL PROGRAM ON LOCKED SET TEMP HI LO ON OFF ROOM TEMP AM PM F F FAN MODE HI/LO ON/OFF COOL MODE SET TEMP TANK FULL PROGRAM RUN/ STOP SET PROG SET CLOCK ENTER PROGRAMMING C C MOTU WE TH FR SA SU START STOP CLOCK FAN COOL PROGRAM ON LOCKED SET TEMP HI LO ON OFF ROOM TEMP AM PM F F FAN MODE HI/LO ON/OFF COOL MODE SET TEMP TANK FULL PROGRAM RUN/ STOP SET PROG SET CLOCK ENTER PROGRAMMING C C OPERATION (cont.) How to Set a Program SET START TIME 1) Press and hold the “SET PROG”.. button for 3 seconds or until beep. 2) Press “SET TEMP” buttons to select day of the week. Step 1 & 18 3) Press “ENTER” button. 4) Press “SET TEMP” buttons to select Step 2 to 17 desired hour. 5) Pr...

Download now

Please, enter two numbers from picture: