Otherwise, see the section later in this chapter on Setting Up Telnet Operation for information on setting the server to allow Telnet access from hosts on its network. Temporarily Reconfiguring a Host for Command Line Management You can temporarily reconfigure an IP host in order to set the server’s IP parameters to allow in-band Telnet access. If you wish to set the server’s basic IP parameters in this fashion, the host must be on the same Ethernet segment as one of the server’s Ethernet interf

Other trademarks are the property of their respective holders. Part number: A00-1869 FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or television communication interference in a commercial environment. Operation of this equipment in a residential area could cause interference with radio or television communication. Table of Contents I