Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Desktops - HP Server tc3100 (2.02 mb)
Desktops - HP Server tc3100 (212.45 kb)
Desktops - HP Server tc3100 (21.27 kb)
Desktops - HP Server tc3100 (90.61 kb)
manual abstract
Installing the HP Server tc3100
Internal-to-external SCSI Cable Kit
Installing the Optional Internal-to-external SCSI Cable
The HP Server tc3100 can be configured to extend one of its SCSI channels (channel A) to an external SCSI
connector. This allows you to connect additional external mass storage devices to the second channel of the server's
embedded SCSI controller.
1.
Remove the IO locking bracket. See Figure 1.
• Lift the bracket up.
• Rotate it toward you and slide out.
Figure 1. Removing IO Locking Bracket
2. Push the top PCI slot cover from the rear of the chassis to remove it.
3. Connect one end of the cable to the free SCSI connector (Channel A) on the system board. See Figure 2.
4. Route the cable straight back to the open slot and clip it in place at the top.
Figure 2. External SCSI A
5.
Replace the IO locking bracket and rotate it to close.
HP Part Number 5990-2636, Doc #5990-2636-1
*5990-2636*
Printed in February 2002
...