Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Desktops - HP Server tc2100 (860.16 kb)
Desktops - HP Server tc2100 (2.02 mb)
manual abstract
2. If you have an IDE system, press Enter to continue. If you have a SCSI model, you need to install the HP SCSI
driver (the SCSI driver proposed by default by NetWare does not install properly):
a. Scroll down to choose Modify and press Enter.
b. Scroll down to highlight the Storage Adapters item and press Enter.
c. The installation program displays the drivers detected: a SCSI driver and a generic ATA/IDE/ATAPI Adapter driver
(IDEATA.HAM). Press Delete to remove the default SCSI driver. The only remaining driver should be the
IDEATA.HAM driver.
NOTE
Do NOT remove the IDEATA driver because it is used by the CD-ROM Drive.
d. Insert HP disk NW#1 (created with the Startup CD) in the floppy drive.
e. Press
Insert to add a driver then Insert again to add an unlisted driver.
f. Press
F3 and specify the path: A:\SCSI, then press Enter.
g. The installation program takes a few seconds then automatically adds the HP driver on the driver list.
NOTE
The new HP driver may show the same device name description but is a more recent version.
h. Scroll down and select Return to driver summary
i.
Scroll down and select Continue
3. The next driver summary screen displays storage and network devices. You need to replace the default Network
board (LAN) driver by the HP LAN driver that performs faster and is more robust:
a. Scroll down to chose Modify and press Enter.
b. Scroll down to highlight the Network boards | CE100B item and press Enter.
c. The installation program displays the default LAN driver: CE100B.LAN | Intel Pro/100+ Management Adapter.
Press Delete to remove this driver.
d. Insert HP disk NW#1 (created with the Startup CD) in the floppy drive.
e. Press
Insert to add a driver then Insert again to add an unlisted driver.
f. Press
F3 and specify the path: A:\LAN then press Enter.
g. The installation program takes a few seconds then automatically adds the HP driver on the driver list.
NOTE
The new HP driver shows the same driver name and device name description, but is a more recent
version.
h. Scroll down and select Return to driver summary.
i.
Scroll down and select Continue.
4. The installation program displays the partitioning properties. HP recommends keeping the default value by selecting
Continue.
5. Wait as the system performs the installation according to your settings.
PHASE 3 – Configure the Network and IDE Drivers
1. The installation proceeds under a graphical interface. Follow the on-screen instructions to configure your network:
server name, IP address, Host name and domain, etc.
'"&$(!" $'
HP Part Number 5971-4537, Doc # 5971-4537-1
Printed in October 2001
3
...