Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Desktops - HP ProLiant BL420c Server Blade (728.29 kb)
Desktops - HP ProLiant BL420c Server Blade (686.99 kb)
manual abstract
Interconnect bay numbering and device
HP ProLiant BL420c Gen8
Overview
mapping
•
HP BladeSystem c7000 Enclosure
Server Blade
Instal ation of a server blade requires the fol owing steps:
1.
Instal and configure an HP BladeSystem c-Class enclosure.
Installation Instructions
2.
Instal any server blade options.
3.
Instal interconnect modules in the enclosure.
4.
Connect the interconnect modules to the network.
5.
Instal a server blade.
6.
Complete the server blade configuration.
For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the server blade user guide.
Installing an HP BladeSystem
c-Class enclosure
Before performing any server blade-specific procedures, instal an
HP BladeSystem c-Class enclosure.
To support network connections for specific signals, instal an
interconnect module in the bay corresponding to the FlexibleLOM or
The most current documentation for server blades and other
mezzanine signals.
HP BladeSystem components is available at the HP website
(http://www.hp.com/go/bladesystem/documentation).
Server blade signal Interconnect bay Interconnect bay labels
Documentation is also available in the following locations:
FlexibleLOM
1 and 2
•
Documentation CD that ships with the enclosure
Mezzanine 1
3 and 4
•
HP website (http://www.hp.com/go/bizsupport)
Mezzanine 2
5 and 6
7 and 8
Installing server blade options
For detailed port mapping information, see the HP BladeSystem
Before instal ing and initializing the server blade, instal any server
enclosure instal ation poster or the HP BladeSystem enclosure setup
blade options, such as an additional processor, hard drive, or
and installation guide on the HP website
mezzanine card. For server blade options instal ation information, see
(http://www.hp.com/go/bladesystem/documentation).
the HP ProLiant BL420c Gen8 Server Blade User Guide on the HP
•
HP BladeSystem c3000 Enclosure and Tower Enclosure
website (http://www.hp.com/go/bladesystem/documentation).
Installing interconnect modules
For specific steps to instal interconnect modules, see the
documentation that ships with the interconnect module.
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shal not be liable for
technical or editorial errors or omissions contained herein.
Part Number: 661810-001
June 2012
Edition: 1
...Other models in this manual:
Desktops - HP ProLiant BL480c Server Blade (474.21 kb)