Syntax ip dhcp restart Default Setting None Command Mode Global Config 7.5.8.2 ip dhcp client-identifier This command is used to specify the DCHP client identifier for this IBP. Use the no form to restore to default value. Intelligent Blade Panel Module Management Commands Command Reference Syntax ip dhcp client-identifier {text | hex } no ip dhcp client-identifier -A text string. (Range: 1-15 characters). -The hexadecimal value (00:00:00:00:00:00). no - This command is used to restore to default value. Default Setting System Burned In MAC Address Command Mode Global Config Intelligent Blade Panel Module Management Commands Command Reference 7.5.9 LOCK Commands 7.5.9.1 lock This command locks the http access to the IBP and registers the passed “lock_identifier” with this lock. When the lock is set, the Web-GUI presents a message that access to this IBP is currently not possible, bcause it is managed by another application. Use the no form to restore to default value. Syntax lock [EXCLUSIVE] no lock {|ALL} < lock_identifier > -A alphanumeric string. (Range: 1-32 characters). no - This command is used to restore to default value. Default Setting None Command Mode Global Config 7.5.9.2 lock_message This command allows specification of the displayed message in the Web-GUI of IBP when a lock is set. It must be possible to specify any HTML string. Use “lock_message default” to restore default value. Syntax lock_message {| default} < message_string > -A specify HTML string. (Range: 1-512 characters). lock_message default - This command is used to restore to default value. Default Setting < message_string > : “This intelligent Blade Panel is currently managed by a Virtual IO Manager. Therefore it is not possible to configure this module by the HTTP user interface. Intelligent Blade Panel Module Management Commands Command Reference If you want to remove this lock, this Blade server must not be managed by any Virtual IO Manager. In order to release the lock without using the Virtual IO Manager issue the command "no lock " for each lock identifier that is registered.” Command Mode Global Config 7.5.9.3 lock_reset This command resets the IBP to unlock status, and restore all lock configuration. Syntax lock_reset Default Setting None Command Mode Global Config 7.5.9.4 show lock This command displays the information which contented the lock status and the list of lock identifiers that are registered. And displays the current lock message. Syntax show lock Default Setting None Command Mode Privileged Exec Display Message Lock Status: This field indicates the current lock status. Lock Message: This field displays the message in the Web-GUI of the IBP when a lock is set. Identifier: This field specifies the registered “lock_identifier” with this lock. State: The state may have the values of None, Normal, or Exclusive. Intelligent Blade Panel Module System Log Management Commands Command Reference 7.6 System Log Management Commands 7.6.1 Show Commands 7.6.1.1 show logging This command displays logging. Syntax Show logging Default Setting None Command Mode Privileged Exec Display Message Logging Client Local Port The port on the collector/relay to which syslog messages are sent CLI Command Logging The mode for CLI command logging. Console Logging The mode for console logging. Console Logging Severity Filter The minimum severity to log to the console log. Messages with an equal or lower numerical severity are logged. Buffered Logging The mode for buffered logging. Syslog Logging The mode for logging to configured syslog hosts. If set to disable logging stops to all syslog hosts. Log Messages Received The number of messages received by the log process. This includes messages that are dropped or ignored Log Messages Dropped The number of messages that could not be processed. Log Messages Relayed The number of messages that are relayed. Log Messages Ignored The number of messages that are ignored. 7.6.2 show logging buffered This command displays the message log maintained by the IBP. The message log contains system trace information. Syntax Show logging buffered Intelligent Blade Panel Module System Log Management Commands Command Reference Default Setting None Command Mode Privileged Exec Display Message Message: The message that has been logged. Note: Message log information is not retained across a system reset. 7.6.3 show logging traplog This command displays the trap log maintained by the IBP. The trap log contains a maximum of 256 entries that wrap. Syntax Show logging traplogs Default Setting None Command Mode Privileged Exec Display Message Number of Traps since last reset: The number of traps that have occurred since the last reset of this device. Trap Log Capacity: The maximum number of traps that could be stored in the IBP. Log: The sequence number of this trap. System Up Time: The relative time since the last reboot of the I...
