Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
Notebooks and Netbooks - VGC-LN1MR (956.78 kb)
Notebooks and Netbooks - VGC-LN1MR (931.8 kb)
Notebooks and Netbooks - VGC-LN1MR (942.27 kb)
Notebooks and Netbooks - VGC-LN1MR (418.31 kb)
manual abstract
HDMI SELECT Illuminates in green while the HDMI input is selected. DISPLAY OFF Illuminates in orange when the LCD backlight is turned off. Hard disk drive/Optical disc drive Illuminates when the drive is reading or writing data. Do not place the computer into Sleep mode or turn it off when this indicator is lit. WIRELESS Illuminates when the WIRELESS switch is turned on, provided that one or more wireless options are enabled in the VAIO Smart Network window. 2121nNGetting Started Setting Up Your Computer Removing and Replacing the Covers Before accessing some ports and jacks on the back of your computer, you first need to remove the back panel cover from the computer and the base stand cover from the base stand. To remove the back panel cover and the base stand cover 1 Gently face down your computer on a flat surface. ! When facing down your computer, be sure to place it on a soft cloth to avoid damage to the LCD screen. n 22 N Getting Started 2 Grasp the back panel cover (1) with both hands, gently lift it, and remove it from the computer. !P ut your fingertips underneath the back panel cover (2) when removing the cover from the computer. n 23 N Getting Started 3 Slide the base stand cover (3) in the direction of the arrow and remove it from the base stand. n 24 N Getting Started To replace the back panel cover and the base stand cover 1 Put the base stand cover (1) back on the base stand and slide it in the direction of the arrow. n2255 NGetting Started Put the back panel cover (2) so as to fit the projections inside the cover into the respective holes on the back of the computer and push in the cover toward the computer. ! Keep the back panel cover and the stand cover on the computer unless access to the back panel is necessary. 2626nNGetting Started Connecting a Power Source and Cables A power cord is supplied with VGC-LV series models, and an AC adapter is supplied with VGC-LN series models to connect your computer to a power source. It must be plugged into the power source before you can establish communication with your wireless keyboard and mouse. In addition, you need to connect other cables if you want to use some functions of your computer, such as the TV function. . Use only the supplied AC adapter or power cord for your computer. To connect the power cord or the AC adapter and other cables 1 Remove the back panel cover and the base stand cover from the computer. See Removing and Replacing the Covers (page 21) for the procedure. 2 Connect a power cord or an AC adapter to the computer. . VGC-LN series models 1 Plug one end of the power cord (1) into the AC adapter (3) and the other end into AC outlet (2). 2727nNGetting Started 2 Put the cable connected to the AC adapter through the hole (4) in the base stand and plug it into the DC IN port (5) as illustrated below. ! The shape of the DC In plug varies depending on the AC adapter. Be sure to push the plug all the way in. n 28 N Getting Started . VGC-LV series models Plug one end of the power cord (6) into the AC outlet (7), put the other end through the hole (8) in the base stand, and plug it into the AC In port (9) on the computer as illustrated below. !B e sure to push the plug into the AC In port all the way to the guide (10). n2299 NGetting Started 3 Connect other cables to the computer, if necessary. . To set up TV connections available on models with the TV tuner board, see Using the TV Function (page 60). . To connect an HDMI cable to the HDMI INPUT port for using the HDMI Input function, see Using the HDMI Input Function (page 69). . To connect your computer to an Ethernet network, see Connecting to a Network (LAN) (page 109). 4 Snap open the cable clamp (11), route the cables through it, and then snap the cable clamp back shut. Replace the stand cover and the back panel cover. See Removing and Replacing the Covers (page 21) for the procedure. . To disconnect your computer completely from AC power, unplug the power cord or the AC adapter when the computer is off. Make sure that the AC outlets are easily accessible. ! If you unplug the power cord or the AC adapter from your computer while the computer is on or in Sleep mode, you may lose all unsaved data. 3030nNGetting Started Connecting the Wireless Keyboard A wireless keyboard and four AA alkaline batteries for use in the keyboard are supplied with your computer. Before attempting to use the wireless keyboard, you must install the batteries and establish communication between the computer and the keyboard. . If you find your keyboard not working, for example after replacement of the keyboard batteries, try the following steps for reconnection. To connect the wireless keyboard ! To connect the wireless keyboard, it must be located within a range of 30 cm to 1 m from the computer. 1 Insert the supplied four AA batteries (1) into the battery compartment (2) on the bottom of the wireless keyboard. 2 Turn on the computer. 3 Slide the power switch (3) on the back of the keyboard to the ON posit...
Other models in this manual:Desktops - VGC-LN1M (7.7 mb)
Desktops - VGC-LV1S (7.7 mb)
Desktops - VGC-LV1SR (7.7 mb)