Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Press the wheel once to lock the scroll action and control the movement by moving the entire mouse (the scroll function is available only with applications that support it). C Right button Press the right button once to display a context-sensitive shortcut menu (not always an active function). D Power switch Slide the switch to turn the mouse on and off. This will help you save battery power. E CONNECT button Press to enable communication between the computer and the wireless mouse. F Battery indicator Blinks when the mouse batteries are running out of power. 3333n N Using Your VAIO Computer Before you use the mouse Two AA alkaline batteries are supplied with your computer for use in the wireless mouse. Before attempting to use the wireless mouse, you must install the batteries and establish communication between your computer and the mouse. ! To maintain good communication, operate the wireless mouse within the distance limitations of mouse: 10 m from your computer. Confirm that the supplied AA batteries are properly installed. Press the CONNECT button located on the back of your computer first, and then press the CONNECT button on the bottom of the wireless mouse. Avoid using any wireless devices that exchange radio signals on the 2.4 GHz frequency band near the wireless mouse. These devices may cause interference, causing the mouse to stop working properly. Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns. Avoid surfaces such as mirrors, smooth glass, or magazines that have half- tone printing. Do not place metal furniture near your computer or wireless mouse, as this may create interference, causing the mouse to stop working properly. Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery. Do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the wireless mouse. n 34 N Using Your VAIO Computer To connect the wireless mouse ! To connect the wireless mouse, it must be located within a range of 30 cm to 1 m from the computer. 1 Insert the supplied two AA batteries into the wireless mouse as shown below. 2 Turn on the computer. 3 Press the CONNECT button (1) on the back of the computer. n 355 N Using Your VAIO Computer Turn over the mouse, slide the power switch to the ON position, and press the CONNECT button. Communication between the mouse and the computer should now be established. ! Steps 3 and 4 must be completed within 10 seconds of each other. . If the wireless mouse does not operate properly, the batteries may need to be replaced. If the wireless mouse is not being used for an extended period of time, remove the batteries to avoid possible damage from battery leakage. 3636n N Using Your VAIO Computer Adjusting the Mouse Functions 1 Click Start and Control Panel. 2 Click Mouse under Hardware and Sound. The Mouse Properties window appears. 3 Change the settings. 3737n N Using Your VAIO Computer Using the Built-in MOTION EYE Camera Your computer is equipped with a built-in MOTION EYE camera. The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software. Turning on the computer activates the built-in MOTION EYE camera, so the computer is ready for a video conference using such software. Note that launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in MOTION EYE camera, respectively. Make sure that the camera is activated before using the software. n 38 N Using Your VAIO Computer . The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera. You can change the capture angle of the built-in MOTION EYE camera with the capture angle adjuster (1) on the back of your computer. Push down or up the horizontal bar to adjust the angle upward or downward, respectively, until you see the live feed in the desired angle. ! The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a malfunction. You cannot operate the built-in MOTION EYE camera with the Microsoft Windows MovieMaker software. n 39 N Using Your VAIO Computer Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc !B e sure to attach the 8cm disc adapter to an 8cm disc before inserting the disc into the optical disc drive slot. Slide the disc straight into the slot so as not to apply excessive pressure to the disc or slot. 1 Turn on the computer. 2 With the label side facing toward you, slide a disc into the optical disc drive slot. n 400 N Using Your VAIO Computer . In Sleep mode, inserting a disc will automatically launch Windows and may display a window for sele...
Other models in this manual:Desktops - VGC-LA3R (3.72 mb)