Votes - , Average rating:
(
)
)
Manafacture: Dell
File size: 6.01 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
manual abstract
..... ...... .. .. ....... ... Rozpoczecie pracy z komputerem Приступая к работе с системой Introduccion al sistema Sistem Baslang.c K.lavuzu Dell™ PowerVault™ MD1200 Storage Enclosures Getting Started With Your System Regulatory Model Series E03J Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, PowerEdge, OpenManage, and PowerVault are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Regulatory Model Series E03J April 2010 P/N H497M Rev. A01 Getting Started With Your System 3 Installation and Configuration WARNING: Before performing the following procedure, review the safety instructions that came with the system. Unpacking the System Unpack your system and identify each item. Installing the Rails and System in a Rack CAUTION: If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. For more information, see "Technical Specifications" on page 7. Assemble the rails and install the system in the rack following the safety instructions and the rack installation instructions provided with your system. 4 Getting Started With Your System Connecting the Power Cable(s) Ensure that the power switch is in the OFF postion before connecting the power cables. Connect the system’s power cable(s) to the system. Securing the Power Cable(s) Bend the system power cable(s) as shown in the illustration and secure the cable(s) firmly to the bracket using the provided strap. Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a power distribution unit (PDU). Getting Started With Your System 5 Turning On the System Press the power switch to the ON position. The power indicators should light. NOTE: Ensure that the storage enclosure is connected to the server and the mode switch set to split or unified mode before turning on the system. Installing the Optional Bezel Install the bezel (optional). Other Information You May Need WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document. • The rack documentation included with your rack solution describes how to install your system into a rack. •The Hardware Owner’s Manual provides information about system features and describes how to troubleshoot the system and install or replace system components. This document is available online at support.dell.com/manuals. • Any media that ships with your system that provides documentation and tools for configuring and managing your system, including those pertaining to the operating system, system management software, system updates, and system components that you purchased with your system. NOTE: Always check for updates on support.dell.com/manuals and read the updates first because they often supersede information in other documents. NOM Information (Mexico Only) The following information is provided on the device described in this document in compliance with the requirements of the official Mexican standards (NOM): Importer: Model number: E03J Supply voltage: 100–240 V CA Frequency: 50/60 Hz Current consumption: 8.6 A Getting Started With Your System Technical Specifications Drives SAS hard drives Up to 12 3.5-inch SAS hot-swappable hard drives (3.0 Gbps and 6.0 Gbps) Enclosure Management Modules (EMMs) EMMs One or two hot-swappable modules with temperature sensors and an audio alarm Connectivity Configurations Support for either of the following configurations: • Unified mode for direct connectivity to 12 hard drives per enclosure. – Up to four daisy-chained storage enclosures for a total of 48 hard drives per controller port and 96 hard drives per controller. – Maximum configuration of two dual-port controllers per server for a total of 192 drives. – Redundant path connectivity provides redundant data paths to each hard drive. Redundant path configuration supports up to four daisy-chained storage enclosures for a total of 48 hard drives p...