Manafacture: Dell
File size: 1.6 mb
File name:
|
Other manuals for this model:
manual abstract
amber light — Blinking amber indicates a problem with an installed device; solid amber indicates an internal power problem (see "Power Problems" in your computer Owner's Manual). Hard drive access light green Link integrity light (on integrated network adapter) green light — A good connection exists between a 10-Mbps network and the computer. orange light — A good connection exists between a 100-Mbps network and the computer. off (no light) — The computer is not detecting a physical connection to the network. Activity light (on integrated network adapter) yellow blinking light Diagnostic lights four lights on the front panel (see Diagnostic Lights for an explanation of the diagnostic light codes) Standby power light STBYLED on the system board Activity light (optional Media Card Reader) green blinking light Power DC power supply: Wattage 275 W Heat dissipation 935 BTU/hr Voltage (see the safety instructions in the Product Information Guide for important voltage setting information) manual selection power supplies — 90 to 135 V at 50/60 Hz; 180 to 265 V at 50/60 Hz Backup battery 3-V CR2032 lithium coin cell Physical Height 31.8 cm (12.5 inches) Width 9.4 cm (3.7 inches) Depth 36.8 cm (14.5 inches) Weight 6.89 kg (15.2 lb) Environmental Temperature: Operating 10° to 35°C (50° to 95°F) Storage –40° to 65°C (–40° to 149°F) Relative humidity 20% to 80% (noncondensing) Maximum vibration: Operating 0.25 G at 3 to 200 Hz at 0.5 octave/min Storage 0.5 G at 3 to 200 Hz at 1 octave/min Maximum shock: Operating bottom half-sine pulse with a change in velocity of 50.8 cm/sec (20 in/sec) Storage 27-G faired square wave with a velocity change of 508 cm/sec (200 in/sec) Altitude: Operating –15.2 to 3048 m (–50 to 10,000 ft) Storage –15.2 to 10,668 m (–50 to 35,000 ft) Back to Contents Page System Setup Dell™ XPS™ 210 Service Manual Overview Entering System Setup System Setup Options Boot Sequence Clearing Forgotten Passwords Clearing CMOS Settings Flashing the BIOS Overview Use system setup as follows: l To change the system configuration information after you add, change, or remove any hardware in your computer l To set or change a user-selectable option such as the user password l To read the current amount of memory or set the type of hard drive installed Before you use system setup, it is recommended that you write down the system setup screen information for future reference. Entering System Setup 1. Turn on (or restart) your computer. 2. When the blue DELL™ logo appears, press