Votes - 4, Average rating: 3.8 ( )

Manafacture: Acer File size: 916.6 kb File name: Language of manual:

Q: System cannot read floppy disc, hard disc, CD or DVD information. A: Check the following: • Make sure you are using the correct type of media. • Check if the floppy disc is formatted correctly. If not, format it again. Caution: If you reformat a floppy disc, you will lose all data on it. Make sure the floppy disc, CD or DVD is inserted correctly (i.e., rightside up) into the proper drive (e.g., floppy disc goes into floppy drive, DVD goes into DVD drive). • Check to be sure the CD or DVD is clean and unscratched. • Check your drive by using a good (i.e., undamaged) floppy or optical disc. If your floppy, CD or DVD drive cannot read the information on the good floppy disc, CD or DVD, there may be a problem with the drive. Contact your dealer or technical support centre for assistance. Q: System cannot write to floppy disc, hard disc or optical disc. A: Check the following: • Make sure the media is not write-protected. • Make sure you are using the correct type of floppy disc. Check if the floppy disc is formatted correctly. If not, format it again. Caution: If you reformat a floppy disc, you will lose all data on it. 11 Taking care of your computer Please read the instructions listed in this section. Following these instructions will help you maximise the durability of your computer. Important tips • Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a radiator. • Do not subject the computer to magnetic fields. • Do not expose the computer to rain or moisture. • Do not spill water onto or into the computer. • Do not subject the computer to heavy shock or vibration. • Do not expose the computer to dust or dirt. • Never place the system on uneven surfaces. • Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cables away from foot traffic. • When unplugging the power cord, do not pull on the cord itself but pull on the plug. • The total ampere rating of the equipment plugged in should not exceed the ampere rating of the cord, if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. • Check the documentation that came with your software and/or drivers to see if you can select other settings to make viewing the screen more comfortable. Cleaning and servicing To clean your computer and keyboard 1 Turn off the computer and unplug the power cord. 2 Use a soft cloth moistened with water and gently wipe the exterior of the computer and the keyboard. Do not use liquid or aerosol cleaners. English EnglishEnglish 12 Taking care of your computer To clean your pointing device To clean your mouse (with roller ball) 1 Open the circular cover underneath the mouse. 2 Take out the roller ball and wipe it with a soft, damp cloth. 3 Put the ball back and replace the cover. To clean your optical mouse For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions. To clean your monitor Make sure you keep your screen clean. For cleaning instructions, refer to the documentation that came with your monitor. When to contact a service technician • If you drop and damage the computer. • If liquid has been spilled into the computer. • If the computer is not operating normally. Asking for technical assistance For technical assistance, contact your local dealer or distributor. You may also access the Acer Web site (for information on how and where to contact the service centres available in your area. 13 Energy Star guidelines compliance As an Energy Partner, Acer Inc. has determined that this product meets the Energy Star guidelines for energy efficiency. D eclaration of conformity for EU countries Acer Inc. hereby declares that this personal computer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference with radio and TV reception. Modem notices TBR 21 This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences among the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. You should contact your equipment supplier right away. Important safety instructions Read these instructions carefully. Save them for future reference. 1 Follow all warnings and instructions marked on the product. 2 Unplug t...

Download now

Please, enter two numbers from picture: