Checking Battery Power To check the remaining battery power, move your cursor over the power icon. The power icon is a “battery” when not using AC power and a “plug” when using AC power. Double click on the icon for more information and settings. Move your mouse over the battery Right-click the battery icon for sub- icon for remaining power information. menus. Left-click the battery icon for power management settings. When the AC power is connected, charging status will be shown. NOTE: If you ig

If the auto-detected parameters do not match the ones that should be used for your disk, you should enter the correct ones manually by setting [User Type HDD]. [User Type HDD] Manually enter the number of cylinders, heads and sectors per track for your drive. Refer to your drive documentation or look on the drive for this information. If no drive is installed or if you are removing a drive and not replacing it, select [None]. Translation Method [LBA] Select the hard disk drive type in this field

(“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HA

3 PC800 RDRAM support Expansion Slots 6 PCI Slots .............................................................................. 17 1 Accelerated Graphics Port (AGP) Pro Slot ......................... 18 2 Communication and Networking Riser (CNR) Slots .......... 15 (CNR2 optional) System I/O 2 IDE Connectors (UltraDMA33/66/100 support) ................... 5 1 Floppy Disk Drive Connector ............................................... 6 3 USB Headers (supports 5 USB ports) ......................

Configuration options: [Disabled] [Enabled] Wake On LAN or PCI Modem card [Disabled] Wake-On-LAN or a PCI modem card allows your computer to be booted from another computer via a network by sending a wake-up frame or signal. Configuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface with Wake-On- LAN and an ATX power supply with at least 720mA +5V standby power. 70 ASUS P4T User’s Manual 4. BIOS SETUP Wake On PS2 KB/PS2 Mouse/CIR [Disabled] Set thi

As they work on their own clock cycle, the rest of the system can be clocked faster. There is a version optimized for video cards, and main memory for motherboards. SPD for SDRAM module Serial Presence Detect (SPD) is most like an ID detect for SDRAM module, it usinga EEPROM component on DIMM module for storing module configuration information inside. The Serial Presence Detect function is implemented using a 2048 bit EEPROM component. This nonvolatile storage device contains data programmed by

SDRAM RAS Precharge Time This controls the idle clocks after issuing a precharge command to the SDRAM. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define]. SDRAM RAS to CAS Delay This controls the latency between the SDRAM active command and the read/write command. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define]. AGP 4X Supported [Enabled] This feature allows the CPU to write directly to the AGP card for up to 30% pe

A copy of a file, directory, or volume on a separate storage device from the original. This copy is for the purpose of data retrieval in case the original is accidentally erased, damaged, or destroyed. BIOS (Basic Input/Output System) BIOS is a set of routines that affect how the computer transfers data between computer components, such as memory, disks, and the display adapter. The BIOS instructions are built into the computer’s read-only memory. BIOS parameters can be configured by the user th

Motherboard layout ............................................................... 1 2. Central Processing Unit (CPU).............................................. 2 Installing the CPU.................................................................. 2 3. System memory .................................................................... 3 Installing a DIMM................................................................... 3 4. Expansion slots .....................................................

19 Line Out jack. This Line Out (lime) jack connects a headphone or a speaker. 20 Microphone jack. This Mic (pink) jack connects a microphone. 21 USB 1 & 2 ports. These two 4-pin Universal Serial Bus 2.0/1.1 ports are available for connecting USB devices such as mouse and PDA. 22 VGA port. This 15-pin VGA port connects to a VGA monitor. 23 Serial port (COM1). This port connects to your serial mouse and other serial devices. 24 USB 3 & 4 ports. These two 4-pin Universal Serial Bus 2.0/1.1 ports a