Votes - 1, Average rating: 4
(
)
)
|
manual abstract
—1— Function of the EXES-5000 CPU-55 Function of the EXES-5000 CPU-55 Selective Fixed function Optional Function No. Function Page No. Function at No.200 Function (Required units) *1 *2 1 Automatic line release 2 Camp-on-busy 3 Privacy 4 Camp-on-privacy 5 Press-to-talk (PTT) 6 Mic off 7 Personal number call 8 Single digit dialing 9 Master Sub relationship 10 Secretary transfer 11 Call transfer 12 Priority 13 Executive priority 14 Continuous calling tone 15 Talk back 16 Conference 17 Selectable calling tone duration 18 Selectable paging pre-announcement tone duration 19 External PA paging 20 Station paging 21 All-call plus 7 individual zone paging and response 22 All-call plus 15 individual zone paging and response 23 10-combination zone paging and response 24 Emergency all-call paging 25 Paging priority 26 2-digit dialing 27 Programmable station numbering 28 Group blocking Programmable restricted 29 access for stations 30 Data transmitting/ 31 receiving units (Display board and 32 interface) 33 Note: All-call paging Conference One-shot make output (mode 1) Make/break output (mode 2) General purpose 8 selectable output and/or control decimal output (mode 3) 4 Decimal digits output (mode 4) In/out annunciation Calling party Indication Pocket pager call and response General purpose control *1 Selective functions may be selected by means of function switches on CPU-55 unit. *2 Programmed functions may be programmed at master station No.200. —2— Talk back unit TKU-11 Conference unit CLU-52 Paging interface unit PIU-52A PIU-52A CLU-52 Data Transmitting Unit DT-E11 Data Receiving Unit DR-B61 6 6 6 7 7 7 8 9 10 11 12 13 13 14 14 15 16 16 16 16 19 19 20 21 22 23 24 25 26 27 27 28 29 Summary of Dial Operations Classification Function Press-to-talk Continuous calling tone Privacy Secretary transfer Single digit registration Single digit dialing Personal number registration Personal numbercancellation Personal number call Call Confernce Conference clear Mic off Priority/priority response Executive priority Call transfer Camp-on-busy Camp-on-privacy PTT Dial operation Number PTT PRIVACY PRIVACY Privacy off ON PRIVACY ON PRIVACY Secretary transfer off ON Registration dials ( maximum 4 digits) Confirmation tone Confirmation tone 1 1000 ~ 1499 Calling Calling station no., personal no., single digit number Busy tone Station called station no., personal no., Busy tone single digit number Transfer Call conversation Conversation with original station station no. , personal no., single digit number Not necessary to re-dial even if station call is busy. Description Conversation is simplex when PTT bar is used. Called party so programmed touches PTT bar, then Hands-free conversation may begin. When a party does not wish to accept incom ming calls, set the Privacy Switch in the ON position. This function allows for automatic transfer of calls to a secretary when desired. This function allows for single digit registration of up to 4 digits among the numbers 0 through 9 and the key. Registered dial code may be automatically dialed. Personal members may be resistered at any master station which the person to whom the number is assigned expects to be. When anyone having a personal number leaves the office, he merely cancels the program ming of his personal number. A conference call may be made with up to 4 persons. Participans must be called individually. If a person called into a conference is absent, the conference may be returned to the original condition. This function is used to temporarily hold a conversation, causing a holding tone to sound at both stations. The line is thus kept open until the party who operates the mic off switch re-dials and the call is continued. When the called party is busy, this function signals to request priority. The party requesting can talk after the called party responds. When the called party is busy, this function allows interruption of the existing conversation and immediate direct contact with the called party. The called party can transfer the call to a selected other station (by station number, personal number or single digit number). When the party called is on the line or when his station is in the privacy mode, the call is held and is automatically put through as soon as the line is open. —4— —4— Paging Data Transmitting and Receiving Unit Function All-call plus 7-zone paging All-call plus 15-zone paging Combination paging All-call response Zone paging response Paging transfer In/Out annunciation One-shot make output Make/break output 8-selectable output (Decimal output) 4 decimal digits output Make output for Pager control Pocket Pager response Clearing calling party indication Dial operation Conversation Paging Transfer Conversation after response Conversationwith original station Personal number registration/cancellation operation — lamp on/off (Make) (Break) Unit no. Condition no. Unit no. Condition no. Unit no. 4-digits Number 0 (All-call) 1 ~ 7 (Zone) 00 (All-call), 0 1 ~ 15 (Zone) 0...