Votes - , Average rating:
(
)
)
Manafacture: Asus
File size: 1.23 mb
File name: E5958_AT3IONT-I_Series.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
Motherboards - AT3IONT-I (1.4 mb)
Motherboards - AT3IONT-I (1.25 mb)
Motherboards - AT3IONT-I (1.16 mb)
Motherboards - AT3IONT-I (843.24 kb)
manual abstract
4. CPU, power, and chassis fan connectors (3-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! AT3IONT-I DELUXEAT3IONT-I SERIES fan connectorsCPU_FANRotation+12VGNDPWR_FANRotation+12VGNDCHA_FANRotation+12VGND 5. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AT3IONT-I DELUXEAT3IONT-I SERIES Analog front panel connectorAAFPPIN 1GNDPRESENCE#SENSE1_RETURSENSE2_RETURPORT1 LPORT1 RPORT2 RSENSE_SENDPORT2 LHD-audio-compliantpin definitionPIN 1AGNDNCNCNCMIC2MICPWRLine out_ RNCLine out_LLegacy AC’97compliant definition • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Select item in the BIOS setup to [HD Audio]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD Audio]. See section 2.4.4 Onboard Devices Configuration for details. 6. System panel connector (10-1 pin F_PANEL) This connector supports several chassis-mounted functions. AT3IONT-I DELUXEAT3IONT-I SERIES System panel connectorPIN 1PWR BTNGNDPWRPLED- PLED+ ResetGroundIDE_LED- IDE_LED+ F_PANELPWR LEDHD_LEDRESET • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin HD_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HD LED lights up or flashes when data is read from or written to the HDD. • ATX power button/soft-off button (2-pin PWRBTN) This 2-pin connector is for the system power button. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. 7. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. AT3IONT-I DELUXEAT3IONT-I SERIES Chassis intrusion connectorGNDChassis Signal+5VSB_MBCHASSIS 8. Serial port connectors (10-1 pin COM1) The connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. The serial port bracket (COM1) is purchased separately. AT3IONT-I DELUXEAT3IONT-I SERIES Serial port (COM1) connectorPIN 1COM1 1.8 Software support 1.8.1 Installing an operating system This motherboard supports Windows® XP/Vista/7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. • Motherboard settings and hardware options vary. Refer to your OS documentation for detailed information. • Ensure that you install Windows® XP Service Pack 3 or later versions / Windows® Vista Service Pack 1 or later versions before installing the drivers for better compatibility and system stability. 1.8.2 Support DVD information The Support DVD that comes with the motherboard package contains the drivers, software applications, and utilities that you can install to avail all motherboard features. The contents of the Support DVD are subject to change at any time without notice. Visit the ASUS website at for updates. To run the Support DVD Place the Support DVD to the optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer. The following screen is for reference only. Click an icon to display Support DVD/ motherboard information Click an item to install If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD. 1.8.3 ASUS VideoSecurity ASUS VideoSecurity is a powerful monitoring and motio...
Other models in this manual:Computer Accessories - AT3IONT-I DELUXE (1.23 mb)