|
User manual Tripp Lite, model B130-101S-WP
Manafacture: Tripp Lite File size: 152.42 kb File name: 5ca9006d-6e8a-49cb-bd49-742eefe34b11.pdf
Language of manual:
|
|
|
|
Free link for this manual available at the bottom of the page
manual abstract
35th Street, Chicago, IL 60609 USA Note: Follow these instructions to ensure proper operation and prevent damage to this device and its connected equipment. Copyright © 2009 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners. 2 Safety Information • To reduce the risk of electric shock, do not expose the product to moisture. • Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product, or cause fire. • Use only recommended accessories to avoid fire, shock or other hazards. • Unplug this product before cleaning. Use a damp cloth for cleaning. Do not use cleaning fluids or aerosols, which could enter the unit and cause damage, fire or electrical shock. • Do not attempt to service this unit. Instead, disconnect it and visit • Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Package Contents • Local Unit • Remote Unit • 3.5 mm Male to DB9 Male Adapter Cable • 3.5 mm Male to DB9 Female Adapter Cable • VGA Splitter Cable, HD15 Male/(2) HD15 Female • (2) 5V, 2.0A DC Power Supplies • (2) Wallplate Screw Sets • 110 Punchdown Tool • Screwdriver • Owner’s Manual Product Features • Extends a VGA* and RS232 serial signal up to 500 ft. (150 m) using standard Cat5/5e/6 cable (or up to 1000 ft. at 1024x768 using Zero-Skew UTP cable) * Supports VGA, SVGA, XGA, UXGA and WUXGA monitors • Remotely operates serial devices such as touch-screen monitors or barcode scanners • Provides a connection for optional local monitor • Features built-in Equalization and Gain controls to adjust the video image • Supports video resolutions up to 1920x1440 • No drivers required Product Features Optional Accessories • P502-Series Monitor Cables with RGB Coax, HD15 Male/Male • P520-006 DB9 M/F Extension Cable, 6ft. • P524-Series Zero-Skew UTP Bulk Cable • N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft. • N022-01K-GY Cat5e Bulk Solid Cable, 1000 ft. • N222-01K-GY Cat6 Bulk Solid Cable, 1000 ft. Specifications Signal Type VGA, SVGA, XGA, UXGA and WUXGA Video Amplifier Bandwidth 350 Mbps Input DDC Signal 0.7 Volts p-p (TTL) Signal Noise Ration 90 dB Local Unit Ports (1) HD15 Female, (1) 3.5mm Female, (1) 110 Punchdown Female Remote Unit Ports (1) HD15 Female, (1) 3.5mm Female, (1) 110 Punchdown Female Power Supply (2) 5V, 2.0A DC Power Supplies Dimensions (Local Unit) 2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D) Dimensions (Remote Unit) 2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D) Local Unit Weight 0.2 lb Remote Unit Weight 0.2 lb Note: Specifications are subject to change without notice. Mass and dimensions are approximate; please take the actual products as the standard. Features 1 Source Video-In Port: HD15 Female Connector. 2 Power LED: This LED illuminates when the external power supply is connected and the unit is receiving power. 3 Local Serial Port: The included 3.5 mm Male to DB9 Female adapter cable plugs into this 3.5 mm Female port. 4 Power Jack: The 5V, 2A external power supply plugs in here. 5 110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110 Punchdown Connectors on the local and remote units. 6 Remote Unit Video-Out Port: HD15 Female Connector. 7 Remote Serial Port: The included 3.5 mm Male to DB9 Male adapter cable plugs into this 3.5 mm Female port. 8 Gain Adjustment: Adjusts brightness. 9 EQ Adjustment: Adjusts equalization length. Local Unit (By Source) Remote Unit (By Display) PowerGainEQRemoteOUTPUTRS232DC5V, 2.0A PowerLocalINPUTRS232DC5V, 2.0A 3 7 2 2 1 6 8 9 4 4 5 Rear Installation 5 4 9 1 2 7 10 3 8 6 11 1 Connect the Male end of the VGA splitter cable to the HD15 port on the source computer. 2 Connect one of the Female ends of the VGA splitter cable to the Local Unit’s HD15 port using a VGA cable. 3 (Optional) Connect a local monitor to the remaining Female connector of the VGA splitter cable using a VGA cable. 4 Connect the included 3.5 mm Male to DB9 Female adapter cable to the 3.5 mm Female port on the local unit. 5 Connect the DB9 port on the computer to the DB9 port on the adapter cable. 6 Connect the external power supply to the power jack on the local unit and plug it into an appropriate power source. 7 Connect the 110 Punchdown Connector on the local unit to the 110 Punchdown Connector on the remote unit using Cat5/5e/6 cable. 8 Connect the HD15 port on the remote unit to a monitor. 9 Connect the included 3.5 mm Male to DB9 Male adapter cable to the 3.5 mm Female port on the remote unit. 10 Connect the DB9 Male port on the adapter cable to the DB9 port of the serial device you are connecting (touch-screen monitor, barcode scanner, etc). 11 Conne...
|