Votes - 0, Average rating: 0
(
)
)
|
manual abstract
EN-10 User’s Manual dynadock™ Introduction Thank you for purchasing the Toshiba dynadock, the universal docking station that enables you to connect your deskspace peripherals through one USB cable to just about any Windows-based notebook. The dynadock is software upgradable to enable you to keep your dynadock in line with technological advances. Visit dynadock.com for the latest software driver support updates. Features . Single USB cable connection to your computer . Upright slim design saves desktop space . Easily accessible ports located on the front . Supports resolution up to 1920 x 1200 VESA CVT standard (Video Electronics Standards Association Coordinated Video Timing) video on external monitor . Hot swappable; you can add or remove most devices without rebooting the computer . Virtual 7.1 channel surround sound . Includes all video and audio drivers to get you started. Please visit for the latest software driver updates . Includes TOSHIBA dynadock Utility to customize dynadock settings . Charges your USB peripherals with the front powered USB ports . The undock button allows you to easily and safely dock and undock the dynadock from your computer. User’s Manual EN-11 dynadock™ Front panel DC-IN LED: Glows blue when power is being correctly supplied from the AC power adaptor. Status LED: Indicates the status of docking, undocking and charging functions. Docking: Flashes green during the docking process, glows green when docked. Undocking: Flashes orange during the undocking process, stops flashing orange when undocked. Charging: Glows orange when charging. 2 USB 2.0 powered ports: Connects and charges select USB peripherals (for example, PDA, MP3 players and cell phones) even when undocked. 3.5 mm mono microphone input port: For connection to an external mono microphone. 3.5 mm stereo headphone output port: For connection to stereo headphones. (Sample Illustration) Indicators and connectors on the front of the dynadock EN-12 User’s Manual Back panel dynadock™ DC IN 15V 3.5mm stereo lineout port: For connection to stereo speakers. 0ptical S/PDIF digital audio output port: Use an optical S/PDIF cable (not provided) to connect to your digital audio equipment, e.g, Dolby® Digital Surround Sound receiver and speaker system. To use this connection, your receiver must have an optical S/PDIF input. 10/100 BASE-TX Ethernet: For connection to the Ethernet network via a network cable (not provided). 4 USB 2.0 ports (A type female connector): For connection to USB peripherals. VGA video output port: For connection to a VGA monitor. Please note, you can only use one video port at a time. DVI-D video output port: For connection to a DVI monitor. USB Upstream Connector: Connects and dynadock to the computer. DC-IN: For connection to the provided AC power adaptor. The dynadock always needs an external power supply for operation, as it does not take power from the USB bus of the computer. Cable Lock Slot: Allows you to connect a cable lock to help prevent theft. (Sample Illustration) Connections on the back of the dynadock User’s Manual EN-13 dynadock™ Top panel Undock button: Controls dock, undock and charging functions. For more detailed information see the Undock button section on page 21. Computer Requirements . 1.2GHz or higher processor. Intel® Pentium®/Celeron® family, or AMD K6®/AMD Athlon™/AMD Duron™ family, or compatible processor recommended (Intel® Core™ 2 Duo 2.0 GB or higher processor recommended for optimal video performance) . 512 MB memory or higher (1 GB memory or higher recommended) . USB 2.0 port . 30 MB of available disk space . Microsoft® Windows® XP (32bit edition), with SP2/SP3 and Microsoft® Windows Vista® (32bit and 64bit edition), with SP1 Assembly Slide the dynadock onto the base as shown below. (Sample Illustration) Assembling the dynadock and base EN-14 User’s Manual dynadock™ Installation Installing the Drivers 1. Insert the provided Installation CD into your optical disc drive. It will run automatically and the dialog box will appear. If the auto-run function is disabled on your system, the program will fail to load automatically. Please open the disk in Windows® Explorer, and double click “AutoRun.exe”. NOTE: You may need to temporarily disable spyware or anti-virus programs while installing the drivers. It is also recommended that all other applications are closed, as you will need to restart your computer after the drivers are installed. You need administrator privilege to install/uninstall the utility and drivers. 2. Click on “Setup” to open the dynadock USB Installer. The dynadock USB installer enables you to easily install, uninstall or update the driver. (Sample Illustration) dynadock Install Menu User’s Manual EN-15 dynadock™ 3. Click the Install button to install the selected programs. The Status area in the right center of the screen indicates the drivers installed. (Sample Illustration) dynadock USB Installer The following drivers are installed during the in...