Login:
Votes - 3, Average rating: 4.7 ( )

User manual Ashly, model Noise Gates SG-35E

Manafacture: Ashly
File size: 403.11 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


LED Throshold Indicator Power Requirements: 120VAC, S0-60HZ. 5W Size: SG-33E: 19"L x 1 3 4 'H x 6”D SG-35E: 19”L x 3 1/2"H x 6"D Shipping Weight: SG-33E: 8 lbs SG-35E: 10 lbs Uivvn UlUVjlUIII Single Channel ,« IN OUT cowmot A QATE OUTPUT NORM KPV " SUBSONIC 5> пег rurtn Architect’s Specification The unit »hall be a two I SO-33 E) or four 1SG-35E) clunnel noise gate ut Hiring ■ class ЛВ Vo It Age CoutioUtd Amplifier and • detector which has a dual release time circuit. The noise gat« »hall here key Inputs. stcico patch tic points and front panel noiae gate bypass switches Performance specifications of a typical pioditrtlon unit ahall meel or eiceed the following: Frequency (espouse shall be fiom BMa to 100k III «0. MB The THD between 2011« and JOklli w/ • lOdRV Input ahall be no mote than 024. The IM Distortion between 20Hi and 20kHz w/ »lOdBV input shall be no more than .02%. Croaetalk from the Key Input »hall be no greater than 854B 9 Iklti. Nol»e. between 20Ht and 20kHr ahall be no greater than -SSdRV. Gain ahaJI be nnlty. Detector атташе try (haU be 0 25dB. Control Voltage Feedthrough shall be typically 66dBV Maximum Input/output level »hall be t204BV The Slew Rate shall be >10V per id Threshold Mange shaM be adjustable from -40 to ►20dHV The attark time OUT DETECTOR (SVMMET R»C Al) threshold ■VVA ATTACK TIME * ■ЛрС* HOLD TIME FADE TIME STEREO TIE h/л- П.ООП shall be adjustable from lOtiS to 30 seconds per 40dB of gain increase. The Hold-Before-Fade time shall be adjustable from 40mS to 12 seconds. The Fade time shall be adjustable from ISmti to 90 seconds pci «MB of gain dcctease. Noise attenuation (Floor! ahall be adjustable from Odll to 75dU. The input Impedance shall tie lOkiJ Balanced Bildglng (Active) The output Impedance •hall be 200.1 terminated with 6000 or greater. The unit ahall operate at 115VAC 5H, 50 60Hj The unit shall be designed for mounting In a standard E1A iy rack (1B"L x |1 75'K (SG-33E) oi 3 ETH (SG-35EII x B'D] and shall have • shipping weight of 8 lb* iSO 33E) or 10 lb* (SO-35E) THe unit shall be either a model SG-33F. two channel Noise Gate or a model SG-33E four channel noise gate manufactured by Ashly Audio Inc. No other unit ahall be acceptable unless data submitted from an Independent test laboratory verifies that the above combined alte/perfnrmanre specs are met ASHLY Since 1972 O lOQO Ashly Audio...

Other models in this manual:
Computer Accessories - Noise Gates SG-33E (403.11 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category