Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
The STK501 includes connectors, jumpers, and hardware allowing full support for the new features on ATmega103, ATmega64, and ATmega128. The Zero Insertion Force (ZIF) socket allows easy use of TQFP packages. In addition to providing support for new devices, the STK501 also adds support for peripherals previously not supported by the STK500. An additional RS-232 driver and an XRAM interface are among the new features. Devices with dual UART or XRAM interface can thus take advantage of the new resources on the STK501 board. O .. AVR Studio® Operated Expansion Connectors for Plug-in Modules and Prototype Areas O Plug-in Module for STK500 (STK500 Required) TQFP Footprint for Emulator Adapters O O .. Serial In-System Programming JTAG Connector for On-chip Debugging using the JTAG ICE O Parallel High-voltage Programming Adds XRAM Support to the STK500 O Zero Insertion Force Socket for TQFP O Board for Devices with XRAM Interface Packages On-board 32 kHz Clock Crystal for O All AVR I/O Ports Easily Acessible O Easy RTC Implementation through Pin Header Connector O Target Voltage 2.7 – 6.0V O Spare RS-232 Driver and Connector O Powered by STK500 MICROCONTROLLERSExpansionBoard ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel®, AVR® and AVR Studio® are registered trademarks of Atmel. Other terms and products names may be the trademarks of others. 2474B-AVR-09/02/15M Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 USA TEL: (1)(408) 441-0311 FAX: (1)(408) 487-2600 Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL: (41) 26-426-5555 FAX: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong TEL: (852) 2721-9778 FAX: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL: (81) 3-3523-3551 FAX: (81) 3-3523-7581 e-mail literature@atmel.com Web Site ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel®, AVR® and AVR Studio® are registered trademarks of Atmel. Other terms and products names may be the trademarks of others. 2474B-AVR-09/02/15M Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 USA TEL: (1)(408) 441-0311 FAX: (1)(408) 487-2600 Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL: (41) 26-426-5555 FAX: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong TEL: (852) 2721-9778 FAX: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL: (81) 3-3523-3551 FAX: (81) 3-3523-7581 e-mail literature@atmel.com Web Site 64-PIN A VR E XP ANSION B OARDSTK501 The STK501 board is a hardware expansion module for the STK500 Development Board. The ZIF socket on the STK501 adds support for ATmega103, ATmega64, and ATmega128 to the list of devices supported by the STK500. The STK500 supports all megaAVR®, tinyAVR™, and classic AVR devices. The STK500 board provides full programming and development support for the ATmega103, ATmega64, and ATmega128. Additional ports and interfaces on the STK500 have now been made available with the STK501. Among the new features are: O Port E, F, and G headers for the additional O Additional RS-232 port for dual UART ports on the 64-pin ATmega103, ATmega64, devices and ATmega128 O JTAG connector for On-chip emulation using O Footprint for mounting an external SRAM on the JTAG ICE on supported devices the board directly connected to t...