Votes - 3, Average rating: 3.7 ( )

Manafacture: HP File size: 1.19 mb File name: 51245.pdf Language of manual:

Turn off the power of your computer and remove the power cable 2. Install the PCIe Low Profile card into an available PCIe Low profile slot in your computer 3. Connect the peripheral ie Printer, Modem, etc. to the adapters port 4. Re-connect the power cable & turn on the power of your computer PCI device listing display (for example…) Bus No Device No Func No Vendor ID Device ID Device Class IRQ 0 7 1 8086 7010 IDE Controller 14 0 13 0 1409 7168 Simple COMM. Controller 10 If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please try another PCI slot. Once the hardware has installed correctly you can start installing the software from the driver CD. Pin Assignments Serial 9 Pin male connector pin assignments: Serial 9 Pin male connector : Pin Signal Pin Signal Pin Signal Pin Signal 1 CD 4 DTR 6 DSR 8 CTS 2 RD 5 GROUND 7 RTS 9 RI 3 TD Technical Specifications · Support x1,x2,x4,x8,x16(lane)PCI-Express Bus connector keys · Operating system: DOS, WIN 9.x, ME, NT, 2000, XP, 2003 Server, VISTA, Win7, LINUX, · 5V / 12V / RI (no power) power selectable on each individual port (Pin 9th ) · Ready of the Intel and AMD 32/64-bit CPU System · Built-in 128 byte hardware FIFO · IRQ and IO address assigned by System · Certified by Microsoft WHQL, CE, FCC approval · PCB: 80 x 65 mm Certifications Certifications FCC Certifications This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN 55024 and EN55022 class A for ITE, EN61000-3-2/-3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Recycling Information WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Inst...

Download now

Please, enter two numbers from picture: