Votes - 3, Average rating: 4 ( )

Manafacture: GE File size: 1.6 mb File name: 20083615314847.pdf Language of manual:

• Clean coffee maker thoroughly before using for the first time (Cleaning). • Insert the charcoal filter (17) into the water filter holder (19). NOTE: To clear the coffee maker of any residues fill it to the maximum level mark with fresh water and run brew cycle. Repeat procedure at least once. Using the coffee maker The coffee maker is only for brewing coffee. • Open coffee-filling lid (2). Place filter basket (20) into coffee maker so that the arrow markers on filter basket (20) line up with arrow on coffee maker (ill. a ). • Insert the permanent filter (21) or a paper filter into the filter basket (20) (ill. b). Do not use the permanent filter with a paper filter as water will not flow through the filter basket correctly. • According to the chart below, use the measuring spoon (1) to add ground coffee into the permanent filter (21). Amounts can be adjusted according to taste (ill. c). Press the front of the coffee-filling lid (2) down until it locks in place (ill j). To Brew Ground Coffee 12 cups 9 spoons 10 cups 7 spoons 8 cups 5.5 spoons 6 cups 5 spoons 4 cups 3 spoons 1 cup=5 oz, 1 spoon=5 g ground coffee • Open water tank lid (4). Fill carafe (14) with desired amount of water. Check the water level indicator (9) on the coffee maker. Pour water into the water tank (10) (ill. d). Close water tank lid (4). Place carafe (14) on keep warm plate (12) (ill. e). NOTE: Splash guard (6) allows you to fill water tank (10) without spills and drips (ill. d). • Insert power plug (13) into a standard 120 V AC wall outlet (ill. f). flashes on the LCD display (31). Setting time • Press hr (28) and hold for 3 seconds (ill. g). The LCD display (31) flashes. Press again to set hours. operation • Press min (26) and hold for 3 seconds. The LCD display (31) flashes. Press again to set minutes. NOTE: The time setting will be deleted if you unplug coffee maker from the outlet and do not plug back in within 14 seconds. flashes on LCD display (31). Starting brewing • Press (30) once to start the manual brewing cycle. (30) lights up. The brewing begins. NOTE: To interrupt brewing, press (30) once more. • When buzzer sounds twice, the brewing cycle is complete. The keep warm cycle starts. Remove carafe (14) to serve coffee (ill. h). Return it to the keep warm plate (12) to keep it warm. CAUTION: Do not touch keep warm plate (12)! Do not open coffee-filling lid (2) during brewing! Risk of burn injury. • If not used for 2 hours, the buzzer sounds 5 times and coffee maker shuts off, the LCD remains on. CAUTION! • After the brew cycle is complete, wait a minimum of 5 minutes before opening the coffee-filling lid (2). Steam builds up under the coffee-filling lid (2). There is a risk of injury from hot steam. Extra features • The drip stop valve (18) function allows you to remove carafe (14) during the brewing cycle to serve a cup of coffee (replace carafe (14) within 30 seconds) (ill. h). • Condensation control (5) allows water that has accumulated under the coffee-filling lid (2), to flow into the filter area when the lid (2) is raised. • Water filter holder (19) with charcoal filter (17). • Cord storage (11) for easy storing of the power cord (13) (ill. f). Button (keep warm function): This coffee maker is provided with an adjustable keep warm plate (12) to control coffee temperature after brewing. • Press and hold (27) for 2 seconds. The digits to are flashing for 2 seconds. Press (27) once more to change the heating temperature level from to . • After 3 seconds the LCD display (31) goes back to time view (default view) and the new setting is saved. • Keep warm function can be adjusted at any time. Default setting is . operation NOTE: The Keep warm temperature is adjustable, is the hottest setting with being the coolest. will keep your coffee at approximately the same temperature as then you finished brewing and is the default setting from the factory. 1-4 Button This function gives your coffee a stronger, more flavorful taste. 1-4 (29) function is a cycle of 30 seconds on and 30 seconds off. The cycle repeats at most 10 times or until water tank (10) is empty. • Press 1-4 (29) before pressing (30) or within 25 seconds after pressing (30) (when the manual brewing already has begun). 1-4 button (29) lights up and the 1-4 function is turned on. • After manual brew cycle is complete, function and button light turn off. NOTE: Press 1-4 (29) within 25 seconds of starting the manual brew cycle to turn off the 1-4 function. TSB button (Time Since Brew) This function indicates the time that has past since the coffee has been brewed. After brewing is complete and buzzer sounds twice, press TSB (25) to see elapsed time (in minutes and hours). After 3 seconds the LCD display (31) returns to defa...

Download now

Please, enter two numbers from picture: