Votes - 2, Average rating: 4 ( )

Manafacture: Black & Decker File size: 596.19 kb File name: DCM1300-DCM1375210.pdf Language of manual:

Remove all stickers, packing material, and literature. 2. Wash the Carafe and Lid in hot, sudsy water—rinse thoroughly. These parts are also top rack, dishwashersafe. 3. Clean the inside of your Coffeemaker by lifting the Reservoir Lid and pouring cold water into the Reservoir up to (but not exceeding) the 8-cup level on the Water Window. Pull open and swing-out the Filter Basket, place a standard paper filter into the Basket, but do not add coffee grounds. Close the Reservoir Lid. 4. Place the Carafe with Lid in the Coffeemaker and push "On." When all the water has brewed through, turn the Coffeemaker off and discard the water and the paper filter. BREWING COFFEE 1. Use the Carafe to fill the Water Reservoir with cold water. Watch for the desired level in the Water Window. Close the Reservoir lid. 2. Pull the swing-out Filter Basket open, place a paper filter into the Basket, add coffee to the desired level (usually one heaping tablespoon for every two cups — adjust to your taste), and shake the basket slightly to distribute grounds evenly. Swing the Basket closed and be sure it latches. 3. Sit the Carafe on the "Keep Hot" plate. For Models with Brew Select, slide the lever from mild to strong depending on your coffee flavor preference. 4. Push the Control to "On" or for delayed brewing (Clock Models Only) see "Setting the Clock Timer." You do not have to set the clock if you want to brew coffee right away. Simply press the "On" button and the light will come on. 5. Replace the Carafe on the "Keep Hot" plate when not serving to keep coffee hot. 6. Flip the Control to "Off" when finished brewing. In clock models, the Coffeemaker will shut off automatically after 2 hours or you may press the "Off" button to instantly turn off the Coffeemaker. SNEAK-A-CUP® INTERRUPT FEATURE The Sneak-a-Cup® Interrupt Feature lets you pour a cup of coffee before brewing is done. There is an automatic drip stop that lets you remove the carafe to "sneak-a cup" without leaking from the Filter Basket (A). NOTE: The carafe must be replaced under the Filter Basket within one minute to prevent the Basket from overflowing. SETTING THE CLOCK/TIMER & AUTO BREWING (Clock Models Only) When the power is first turned on, the clock will flash 12:00 a.m. until the correct time is set. The Coffeemaker will work without setting the clock. 1. To set the current time of day: press the HOUR button until you reach the correct hour. Watch for the little dot in the top left corner of the display that indicates "p.m." time. Press the MIN button to set the correct minutes. Once set, the clock will continue to keep time unless the Coffeemaker is unplugged or there is a power failure. 2. To set the auto on time: press and hold the PROG button with one finger while you press the HOUR, then MIN buttons to set the time you’d like coffee to automatically begin brewing (B). Be sure to watch for the "p.m." indicator dot in the digital display. When you let go of the PROG button, your auto time will ...

Download now

Please, enter two numbers from picture: