Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 12.6 mb File name: Language of manual:

> Remove the Service T DISC from its compartment at the back of the appliance. > Now replace the water tank and push it irmly down into place. > Turn the on/off switch on (I). All display items will light up briely and then a Stand-by stays lit. > Select a large cup (min. 200 ml) and place it on the cup shelf. 05/2011 01_TAS 65_85_Heft1.indb 23 09.05.2011 09:32:30 24en24en 1.3.2. click4.5. min. 200 ml > 1. Open the brewing unit by lifting the lid. 2. Place the Service T DISC on the T DISC holder with the barcode facing down. Make sure that the lap of the T DISC is secured in the slot to the right. 3. Now close the brewing unit by pushing the lid down irmly until it audibly clicks into place. 4. Press the start /stop button. The cleaning process starts and dispenses water into the cup. 5. When the process is complete, empty the cup and put it back on the cup stand. !! Important: – Please!complete!steps!4.!and!5.!four! times. > Open the brewing unit, remove the Service T DISC and store it in the compartment at the back!of!the! machine behind the water tank. Robert Bosch Hausgerate GmbH 01_TAS 65_85_Heft1.indb 24 09.05.2011 09:32:31 25en25en !BRITA!Maxtra!water! i!ltration!system Only!BRITA!Maxtra!water!i!ltration! system!cartridges!may!be!used!in! machines!with!a!water!i!ltration!system. The BRITA Maxtra cartridges may be obtained from various retailers or directly from your Bosch Service Center (please ind contact details on page 194). click Your machine can be operated with or without a ilter cartridge. Simply remove the ilter holder and ilter cartridge from the water tank if you don’t want to use it. When using a new ilter cartridge in the machine, please observe the following procedure: Preparing!and!inserting!BRITA!Maxtra! i!lter!cartridge! > Remove the ilter cartridge from the protective wrap. > Immerse the ilter cartridge in cold tap water and move it gently back and forth to eliminate air bubbles (approx. 5 sec.). > Remove the ilter holder in the water tank and insert the ilter cartridge in the appropriate chamber of the ilter holder, until it makes an audible clicking sound. 05/2011 01_TAS 65_85_Heft1.indb 25 09.05.2011 09:32:32 26en26en 2 - 3x Tip: If only one bar is visible, please purchase a new ilter cartridge. The BRITA Maxtra cartridges may be obtained from various retailers or directly from your Bosch Service Center (please ind contact details on page 194). > Holding it over the sink, ill the ilter holder with fresh, cold water and let it ilter through. > Please repeat this procedure two to three times. > Now place the ilter holder with ilter cartridge back into the empty water tank and ill the tank with water. !Activate!BRITA!Filter!cartridge!change! indicator For maximum ilter performance and anti- scale protection, the BRITA Maxtra ilter cartridge must be replaced every 8 weeks. To ensure this is done, the cover of the water tank has a built-in BRITA Maxtra Filter cartridge change indicator. It tells you by means of bars when the...

Download now

Please, enter two numbers from picture: