|
manual abstract
Children should be supervised to ensure that they do not play with the appliance. • Do not touch the hot surfaces. Use the handle or the switch. • Don’t immerse the appliance, the plug or power cord in water. • Always remove the plug from the socket whenever the device is not in use, when attaching accessory parts, cleaning the device or whenever a disturbance occurs. Leave it to cool down before putting it away or removing pieces and before cleaning the appliance. • To switch the coffee maker off, put the ON/OFF switch to “0” position and unplug the appliance. • Do not use outdoors. Only for household. • Do not let the cable hang over the edge of the table or work-top, nor let it come into contact with hot surfaces. • Do not switch the appliance on if the cable or the plug is damaged or if it can be detected that the appliance is not working correctly. • WARNING: Do not remove the lid while the appliance is operating. • WARNING: To reduce the risk of fire or electric shock, never remove any of the covers. There are no user serviceable parts on the inside. Cable repairs and replacements must be carried out exclusively by an Authorized Technical Service Centre. • This appliance has been designed exclusively for domestic use. For indoor use only. • If the supply cord is damaged, it must be replaced by the manufacturer or by its authorized technical service in order to avoid hazard. USE Before using it for the first time rinse all of the accessories and operate it once without coffee. 1. Use glass jug to fill the tank with cold water (Fig. 1). The amount of water is showed on glass jug. A quantity of less than two cups is not recommended. 2. Place the detachable filter seat and the permanent filter into the filter holder. Put in one tablespoonful of coffee for each cup of water (Fig. 3). Important: handle must be used every time in order to place detachable filter seat correctly. (Fig. 2) Note: • This coffee maker can be used with the permanent filter or with n. 1x4 / 1x2 paper filters. (n. 1x2--->CG7213; n. 1x4--->CG7223) • For a correct operation, do not use a too finely ground coffee. 3. Place the jug, fitted with its lid, on the non-stick heating plate, plug the coffee maker into the mains and switch it on (Fig. 4). DRIP-STOP VALVE A cup of coffee can be served before the brew cycle has finished. Whenever the jug is removed from the non-stick heating plate, the drip feed will be temporarily detained. Place the jug back on the hot plate within 20 seconds (Fig. 5). CLEANING & MAINTENANCE Make sure that the coffee maker is unplugged and cold before attempting to clean it. After daily use wash the removable parts with soapy water and wipe down the outside of the coffee maker with a soft and damp cloth. Do not use abrasive cleaners or metal scouring pads. Dry the appliance thoroughly after cleaning. DESCALING Descale your coffee maker whenever you begin to notice excessive steaming or the brewing time increases. It is advisable to descale it every tw...
Other models in this manual:Coffee Makers - CG7223/01 (820.57 kb)