Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Select 1 bar for a small cup of coffee (80 , ml) (Fig. 18) 4222.200.0085.14 Select 2 bars for a medium cup of coffee (125 , ml) (Fig. 19) Select 3 bars for a large cup of coffee (145 , ml) (Fig. 20) 10 Press the button indicating the number of cups of SENSEO\ coffee you want to brew. (Fig. 21) -Press the 1-cup button q for one cup. -Press the 2-cup button qq for two cups. The light rings around the 1-cup button qand the 2-cup button qq indicate if there is still enough water left for brewing one or two cups of coffee. If there is not enough water left in the water reservoir for brewing two cups of coffee, the light ring around the 2-cup button qqwill not go on and this button cannot be operated. The SENSEO\ coffee machine starts brewing. , -The machine automatically supplies the selected amount of water. -You can interrupt the brewing process at any time by pressing the on/off button 3. If you switch the machine back on after having interrupted the brewing process, the machine will not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this will cause the machine to draw in air.When this happens, the next cup will only be partly filled. Note: If you only get a small quantity of coffee or no coffee at all out of the machine, you have not flushed the machine properly before first use. As a result, the boiler is not or not completely filled. Flush the machine properly (see chapter ‘Preparing the machine for use’) before you brew another cup of coffee. 11 Remove the coffee pod(s) after use by lifting the pod holder out of the machine and emptying it. Be careful when doing this, for there may still be some water/coffee on the coffee pod(s). Tips By rinsing the pod holders, the coffee collector and , the coffee spout regularly, you will make sure that the coffee always tastes optimally. The SENSEO\ coffee will taste best if you stir it , before drinking it. If you intend to make another cup of SENSEO\ , coffee later, just leave the coffee machine switched on.The machine will automatically switch itself off after 1 hour (Fig. 22). Cleaning Never immerse the SENSEO\ coffee machine in water. Never clean the machine by flushing it with the lid open. 1 2 3 4 Always unplug the machine before cleaning it. Clean the outside of the machine with a moist cloth. Remove the coffee collector (Fig. 23). Take the coffee spout out of the machine by sliding it upwards (Fig. 24). The coffee spout can only be taken out after the coffee collector has been removed. You can disassemble the coffee spout for more , thorough cleaning! (Fig. 25) 5 6 Clean the coffee spout, the coffee collector and the drip tray in hot water, if necessary with some washing-up liquid, or in the dishwasher (Fig. 26). Hold the cup tray in your hand while cleaning it with hot water, if necessary with some washing-up liquid (Fig. 27). The cup tray can also be cleaned in the dishwasher. To clean the cup tray, always remove it from the machine, as it might prove sharp when handled incorrectly. Always handle it carefully. 7 Clean the pod holders in hot water, if necessary with some washing-up liquid, or in the dishwasher. (Fig. 28) Check if the sieve in the centre of the pod holder is clogged. If this is the case, unclog the sieve by rinsing the pod holder under a running tap. Use a washing-up brush to clean the sieve, if necessar y. 8 Clean the water reservoir in hot water, if necessary with some washing-up liquid. (Fig. 29) Note: If you are using a washing-up brush, be careful not to damage the valve in the bottom of the water reservoir. 9 Do not use an object with sharp edges to clean the water inlet on the machine (Fig. 30). 10 Rinse the parts with fresh water after cleaning and put them back into the machine. 11 Clean the water distribution disc with a moist cloth (Fig. 31). Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine will star t leaking! Flushing If you have not used the coffee machine for three days, you have to flush it with fresh water before you use it again. Flush the machine in the following way: 1 2 3 4 Fill the water reservoir with cold water up to the MAX indication and put it back into the machine (Fig. 3). Put the 1-cup pod holder qor the 2-cup pod holder qq in the machine without pod(s) (Fig. 13). Put a bowl (with a capacity of at least 1500 ml) under the coffee spout to collect the water (Fig. 8). Press on/off button 3 (1) and subsequently press the 1-cup button qand the 2-cup button qq briefly at the same time (2) (Fig. 32). The machine fills itself with water from the water reser voir. While this happens, water comes out of the spout. When the flushing cycle is finished, the machine switches itself off. During the flushing cycle, the machine produces more noise than during a regular brewing cycle. Descaling Regular descaling will prolong the life of the coffee machine and will...