Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 2.08 mb File name: Language of manual:

Note: You can stop dispensing as well, by pressing either “ “ or “ “ button. 4 When the above steps are complete, check that the light “ “ shines steadily. Steady on 12 ENGLISH Manual rinse cycle During this process you brew a coffee and fresh water flows through the steam/hot water circuit. This takes a few minutes. 1 Place a cup under the dispensing spout 2 Check that the “ “ light shines steadily. Steady on 3 Press the “ “ button. The machine starts brewing coff ee. 4 Wait until brewing is complete and empty the cup. 5 Place a large container (1,2 lt) under the hot water/steam wand (Pannarello, if supplied). 6 Turn the control dial clockwise to the “ ” position. 7 Dispense water until the no water signal is displayed. The “ ” light shines steadily. ENGLISH 13 8 Now turn the control dial counterclockwise back to the “ ” position. 9 At the end, fill the water tank again. Then the machine is ready for brewing products. Notes: When you haven’t used the machine for 2 or more weeks, the machine will automatically perform an automatic rinse/self-cleaning cycle after you have switched on the machine. There after you need to initiate the manual rinse cycle including brewing a coffee as described above. The automatic rinse/self-cleaning cycle is also initiated automatically when starting up the machine (with a cold boiler) or when the machine is preparing to go in stand-by mode, after you have pressed the ON/OFF button (after a coffee has been brewed). 14 ENGLISH 3 Set the filter according to the measurements performed to set the wa- ter hardness. Use the water hardness test strip provided with the fi lter. Set the “Intenza Aroma System” as specified on the fi lter package. A = Soft water B = Hard water (standard) C = Very hard water 4 Put the filter into the empty water tank. Press it until it cannot move further down. 5 Fill the water tank with fresh water and reinsert it into the machine. Write down the date of the next water filter replacement (+ 2 months). 6 To activate the water filter, dispense the entire water tank by using the hot water function (see section “Hot Water Dispensing”). 7 Fill the water tank again. The machine is now ready. 1 Remove the small white filter from the water tank and store it in a dry place. 2 Remove the “INTENZA+” water filter from its packaging, immerse it vertically (with the opening positioned upwards) in cold water and delicately press the sides so as to let the air bubbles out. HOW TO INSTALL THE INTENZA+ WATER FILTER (OPTIONAL) You can purchase separately the Intenza+ water filter. Please refer to the accessory page in this usermanual for further details. Water is a crucial part of every espresso-so it’s most important to always have it professionally filtered. Using the “INTENZA+” water filter will prevent mineral deposits from building up and improve your water quality. ENGLISH 15 ADJUSTMENTS The machine allows for certain adjustments so that you can brew the best tasting coff ee possible. Saeco Adapting System Coffee is a natural product and its characteristics may change according to its origin, blend and roast. The machine is equipped with a self-adjusting system that allows the use of all types of coffee beans available on the market (not for caramelized beans). The machine automatically adjusts itself after brewing several cups of coffee to optimize the extraction of the coffee to the compactness of the ground coff ee. How to adjust the Ceramic Coff ee Grinder Ceramic coffee grinders always guarantee accurate grinding for every cof- fee blend and prevent the beans from overheating. This provides for full aroma preservation, delivering the truly Italian taste in every cup. Warning: The ceramic coffee grinder contains moving parts that may be danger- ous. Therefore, do not insert fingers and/ or other objects. Only adjust the ceramic coffee grinder using the grinder adjustment key. Turn off the machine by pressing the ON/OFF button and remove the plug from the socket before carrying out any type of operation inside the coffee bean hopper. You can adjust the ceramic grinders to set the coffee grinding to your personal taste. Warning: The grinder adjustment knob, inside the coffee bean hopper, must be turned only when the ceramic coffee grinder is working. This adjustment can be carried out by pressing and turning the grinder adjustment knob inside the coffee bean hopper, using the grinder adjust- ment key provided with the machine. 1 Press and turn the grinder adjustment knob one notch at a time. You will taste the difference after brewing 2-3 cups of espresso. 16 ENGLISH 1122 2 The reference marks inside the coffee bean hopper indicate the grind setting. There are 5 different grind settings to choose from varying from: 1 - Course grind: Lighter taste, for dark roasted coff ee blends to 2 - Fine grind: Bolder taste, for light roasted coff ee blends When you adjust the ceramic coffee grinder to a finer setting, your coff ee will taste stronger. For a milder coffee taste,...

Download now

Please, enter two numbers from picture: