Login:
Votes - 3, Average rating: 4.7 ( )

User manual Philips, model 60

Manafacture: Philips
File size: 3.68 mb
File name:
Language of manual:ruplukenhusk
Free link for this manual available at the bottom of the page



Other manuals for this model:
Coffee Makers - 60 (257.14 kb)ukenro

manual abstract


Caution -Always return the machine to a service centre authorised by Philips for examination or repair. Do not attempt to repair the machine yourself, otherwise your guarantee becomes invalid. -Never put normal ground coffee or use torn pods in the SENSEO® machine, as this causes it to become blocked. -Do not use the machine in combination with a transformer, as this could cause hazardous situations. -Always put the machine on a flat and stable surface. -Never let the machine operate unattended. -Do not use the machine at altitudes higher than 2200 metres above sea level. -The machine does not work at temperatures below 10°C. -Flush the coffee machine with fresh water before you use it for the first time (see chapter ‘Preparing the machine for use’).This causes the boiler to fill with water, which is essential for the machine to work properly. -Do not use the SENSEO® machine in combination with water softeners based on sodium exchange. -Philips strongly advises you to descale this SENSEO® machine every 3 months. If the machine is not descaled in time and according to the procedure described in chapter ‘Descaling’, this may lead to technical failures. -Never interrupt the descaling process. -Never use a descaling agent based on mineral acids such as sulphuric acid, hydrochloric acid, sulphamic acid and acetic acid (e.g. vinegar). These descaling agents may damage your SENSEO® coffee machine. -Never turn your SENSEO® machine on its side. Always keep it in upright position, also during transport. electromagnetic fields (eMF) This machine complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user EnglisH 7 EnglisH manual, the machine is safe to use based on scientific evidence available today. Preparing the machine for use You cannot brew coffee if you have not flushed the SENSEO® coffee machine first! The flushing cycle causes the boiler tofill with water.After this, the coffee machine is ready for use. Flush the machine in the following way: 1 Remove the water reservoir. 2 Fill the water reservoir with cold water up to the MaX indication and put it back onto the machine. 3 Move the lever upwards to release the lid. 4 Open the lid. 5 Put the 1-cup pod holder ° or the 2-cup pod holder °°in the machine without pod(s). EnglisH 6 Close the lid and lock the lever. CLICKAB Note: Make sure you lock the lever properly. Push it down until it snaps home with a click. Note: Never flush the machine with the lid open.The lid must be properly locked. 7 8 Put the plug in an earthed wall socket. Put a bowl (with a capacity of at least 1500ml) under the coffee spout to collect the water. 9 Press the on/off button I and subsequently press the 1-cup button ° and the 2-cup button °° briefly at the same time. The boiler fills itself with water from the water reservoir.This takes , some time (approx. 90 to 150 seconds).The machine switches off automatically when the flushing cycle ends. During the flushing cycle, the machine produces more noise than during a regular brewing cycle. Note: Before you use the machine for the first time, clean the coffee spout and the pod holders with hot water and some washing-up liquid or in the dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with some washing-up liquid. Now your Philips SENSEO® coffee machine is ready for use. Brewing coffee 1 Fill the water reservoir with cold water up to the MaX indication and put it back onto the machine. Never pour milk, coffee, hot water or carbonated water into the water reservoir. -° MIN: minimum amount of water required to brew 1 cup of SENSEO® coffee. -°° MIN: minimum amount of water required to brew 2 cups of SENSEO® coffee. -A full reservoir allows you to make SENSEO® coffee a number of times (up to 5 cups (HD7810, HD7812) or up to 10 cups (HD7811). This makes it unnecessary to fill the water reservoir each time you want to make a cup of coffee. 10 EnglisH 2 Press the on/off button I. The indicator light flashes while the water heats up. Heating up takes approx. 90 seconds. The coffee machine is ready for use when the indicator light lights up , continuously. Move the lever upwards to release the lid. Open the lid. Place the appropriate pod holder in the machine. 3 4 5 Note: Make sure the pod holder is clean and the sieve in the centre is not clogged, e.g. with loose coffee grounds. If you want to make one cup of SENSEO® coffee, use 1 coffee pod in , combination with the 1-cup pod holder ° and the 1-cup button °. If you want to make two cups of SENSEO® coffee, use 2 coffee pods , in combination with the deeper 2-cup pod holder °° and the 2cup button °°. 6 Place the SENSEO® coffee pod(s) properly in the centre of the pod holder, with the convex side pointing downwards. Note: Use SENSEO® coffee pods from Douwe Egberts specially designed for your SENSEO® coffee machine for a full and round taste. Place 1 SENSEO® coffee pod in the 1-cup pod holder °. , CLICK...

Other models in this manual:
Coffee Makers - HD7810 (3.68 mb)
Coffee Makers - HD 7810/75 (3.68 mb)
Coffee Makers - HD 7810/95 (3.68 mb)
Coffee Makers - HD 7810/65 (3.68 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category