Votes - 4, Average rating: 4
(
)
)
|
manual abstract
All repairs must be made by an authorized Sunbeam Service Center. Please call us for assistance or for the location of the nearest authorized Sunbeam Service Center. PLEASE DO NOT RETURN THIS APPLIANCE TO YOUR STORE. We welcome your questions, comments or suggestions. Please include your name, address and telephone we can reach you if necessary. Do not send product to the address below. PLEASE CALL USAT 1-800-672-6333 OR WRITE USAT: CONSUMER SERVICE DEPARTMENT P.O. Box 948389 Maitland, Florida 32794-8389 or e-mail: consumeraffairs@sunbeam.com SAVE THESE INSTRUCTIONS 3 INTRODUCTION CONGRATULATIONS! You are the owner of a MR. COFFEE ® AD SERIES COFFEEMAKER. Please read all of the instructions in this manual carefully before you begin to use this appliance. Proper care and maintenance will ensure the long life of this appliance and its trouble-free operation. Save this Instruction Manual and refer to it often for cleaning and care tips. DIAGRAM OF PARTS REPLACEMENT DECANTER DECANTER LID ON/OFF BUTTON ONE-PIECE SWING-OUT FILTER BASKET DECANTER WARMING PLATE 2 10 4 6 8 DUST COVER WATER LEVEL INDICATOR WINDOW WATER RESERVOIR PD12 (WHITE) OR PD13 (BLACK) { OFF ON Hour Min Brew Off On Auto PM Off AD10, AD10BLK ADS10 ADX13, ADX20 AD12, AD12BLK ADS12 ADX23 4 OPERATION AND USE BEFORE FIRST USE Before using your Coffeemaker for the first time, wash decanter/lid and removable brew basket using a mild, non-abrasive detergent and water. Rinse each thoroughly. Follow steps 4-6 (Brewing Coffee) using water, to clean the inside. Hour Min Brew AUTO ON/ CONTROL OFF HOUR MINUTE BREW OFF/ SWITCHLIGHT SET SET SET LIGHT (ON/OFF/AUTO) SETTING CLOCK AND TIMER (ADX13, ADX20 AND ADX23 MODELS ONLY) IMPORTANT: Please Read Before First Use. The clock on these models must be set first, before the Coffeemaker will operate. SETTING THE CLOCK 1. Slide the control switch to “OFF. ” 2. Plug the power cord into your electrical outlet. The clock display will flash until you set the time. 3. Alternately press and hold the “HOUR” and “MINUTE” buttons until the current time. The “PM” indicator light in the display will illuminate indicate PM time. PRESETTING THE BREWING TIME 1. Press and hold the “BREW” button while setting the “HOUR” and “MINUTE” buttons. The “PM” indicator light illuminate to indicate PM time. BREWING AUTOMATICALLY AT THE PRESET TIME 1. Follow Steps 1 – 5 in the “Brewing” Section. 2. Always slide the control switch ” 3. Brewing will begin at the decanter for 2 hours. keep your coffee hot slide the switch from “AUTO” ON”. 5 IMPORTANT: The programmable timer will NOT automatically brew the next day if left in the “ AUTO” position after its last use. This is to prevent unanticipated operation. If the “ AUTO OFF” light in the lower right hand corner of the clock display is illuminated, reset “ AUTO BREW” by sliding the control switch to “OFF” and then to “ AUTO. ” BREWING If the clock display is flashing, refer to section (setting the clock) before continuing. 1. Open the ...
Other models in this manual:Coffee Makers - AD10BLK (246.12 kb)
Coffee Makers - AD12BLK (246.12 kb)
Coffee Makers - ADS10 (246.12 kb)
Coffee Makers - ADS12 (246.12 kb)