Login:
Votes - 2, Average rating: 5 ( )

User manual Cecilware, model C-2003G-IT

Manafacture: Cecilware
File size: 800.39 kb
File name: bfa95de9-44ac-40cd-b7f0-adc609ea1c89.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


The RTC also has separate settings for weekdays and weekends. This feature eliminates the wait associated with heating up the reservoir tank every morning. Refer to the Service Mode Descriptions for more information on Real-Time-Clock parameters. 7 SERVICE MODE Description – The main function of Service Mode is to give qualified personnel the ability to configure the system to meet the requirements of each installation. General Conventions (unless otherwise indicated) 1) To enter or exit Service Mode simultaneously depress both the hidden key under the Cecilware Logo (CW Key) and the hidden key under the first letter of the Model Name (MN Key) until the buzzer sounds (approximately two seconds). 2) Depressing the MN Key will cause the menu to scroll up and depressing the CW Key will cause the menu to scroll down. 3) Depressing the [Up Arrow] Key or [Down Arrow] Key individually will increase, decrease, or toggle the displayed parameter respectively. 4) Simultaneously depressing both the [Up Arrow] Key and the [Down Arrow] Key is used to acknowledge a request for confirmation (i.e. ARE YOU SURE?). 5) Modified parameters are saved upon scrolling to a different menu. 6) The system will automatically exit Service Mode and enter Normal Mode if the keypad remains idle (i.e. no keys are pressed) for more then three minutes. KEYLOCK KEYLOCK ON/OFF Description – The KeyLock feature disables all keys on the keypad. This feature prevents unauthorized users from tampering with the controls. For user convenience a method has been provided to temporarily override KeyLock. While depressing the hidden Cecilware (CW) Key the KeyLock feature is disabled. This allows authorized users to easily start a Brew Cycle while preventing unauthorized users from doing the same. The presence of the “KL” symbol on the screen in Normal Mode indicates the status of KeyLock (see Normal Mode Descriptions). DISPENSE TOTAL DISPENSE TOTAL ######## OZ Description – The Dispense Total is the total volume of hot water automatically dispensed since the machine was assembled at the factory. This value cannot be changed or reset! BREW CYCLES BREW CYCLES ##### Description – The Brew Cycles screen displays the value of the Brew Cycle Counter. The Brew Cycle Counter contains the total number of completed Brew Cycles since the counter was last reset. The Brew Cycle Counter can be reset (set to zero) by simultaneously depressing the [Up Arrow] Key and [Down Arrow] Key for approximately two seconds. BREW SIZE BREW SIZE ###.# OZ Description – The Brew Size is the required volume of hot water dispensed during each Brew Cycle. BREW FILL CONSTANT BREW FILL CONST #.## OZ/SEC Description – The Brew Fill Constant is the exact value of the rate at which hot water is dispensed from the Dump Solenoid Valve during each Brew Cycle. The accuracy of this value is crucial to the proper operation of this system. This value is directly related to the orifice size of the Dump Solenoid Valve. A simple method for calibrating the Dump Solenoid Valve has been provided in Normal Mode (see Brew Fill Constant Calibration section of Normal Mode Descriptions). PRE-INFUSION -OPTIONAL PRE-INFUSION ON/OFF Description – The Pre-Infusion feature gives the user the ability to “wet” the grinds for a period of time (Infusion Time) and then allow the grinds to “soak” for a period of time (Soak Time) before brewing. 8 INFUSION TIME - OPTIONAL INFUSION TIME ## SECONDS Description – The Infusion Time is the amount of time that the system will dispense (infuse) hot water into the grinds during the Pre-Infusion process. SOAK TIME – OPTIONAL SOAK TIME ## SECONDS Description – The Soak Time is the amount of time that the system will wait between the end of the hot water infusion period and the beginning of brewing. PULSE BREW - OPTIONAL PULSE BREW ON/OFF Description – The Pulse Brew feature gives the user the ability to brew by non-continuously dispensing (pulsing) hot water. PULSE ON TIME -OPTIONAL PULSE ON TIME ## SECONDS Description – The Pulse ON Time is the amount of time that the system will continuously dispense hot water during a Brew Cycle. PULSE OFF TIME -OPTIONAL PULSE OFF TIME ## SECONDS Description – The Pulse OFF Time is the amount of time that the system will wait between hot water dispenses during a Brew Cycle. DRIP TIME DRIP TIME ### SECONDS Description – The Drip Time is the amount of time that the system will wait after the completion of the hot water dispense before signaling the end of the Brew Cycle. This allows time for any water remaining in the funnel to drain out. WATER TEMPERATURE WATER TEMP ### °F Description – The Water Temperature is the required (set point) temperature of the water in the reservoir tank. TEMPERATURE SENSOR CALIBRATION TEMP SENSOR CAL ARE YOU SURE ? Description – The Temperature Sensor Calibration allows the user to offset (calibrate) the displayed water temperature to a reference thermometer. Instructions – Use the [Arrow] Keys to adjust (calibrate) t...

Other models in this manual:
Coffee Makers - C-2003LG-IT (800.39 kb)
Coffee Makers - C-2003RG-IT (800.39 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category