Login:
Votes - 3, Average rating: 4 ( )

User manual AEG, model KF 2060

Manafacture: AEG
File size: 240.37 kb
File name:
Language of manual:
Free link for this manual available at the bottom of the page



manual abstract


0 Press the aroma button (Figure 2c/J). The symbol will appear in the display (Figure 2c/A). To cancel the selected quantity 2-4 cups, press the aroma button again. The symbol will go out in the display. Start and end the brewing procedure as described above. Preparing coffee using the timer Your appliance has a timer with which you can programme the start of the brewing procedure up to 24 hours in advance. First set the current time. The display (Figure 2c/A) will flash “00:00”. 0 Press the button for HOURS (Figure 2c/B) for approx. 2 seconds and hold it down until the correct time is shown in the display (Figure 2c/A). 0 Press the button for MINUTES (Figure 2c/C) and proceed as for setting the hours. Set the time at which you wish the brewing procedure to start. 0 Press the programme button (Figure 2c/H). 0 Press the button for HOURS (Figure 2c/B) and set the hours. 0 Press the button for MINUTES (Figure 2c/C) and set the minutes. 0 Press the AUTO-START button (Figure 2c/D). The display for AUTO-START (Figure 2c/E) is illuminated. The programmed start time will go out in the display and the current time will reap pear. The brewing procedure will start automatically at the starting time you have programmed. The indicator (red) (Figure 2c/F) is illuminated. To check the programmed start time, press the programme button (Figure 2c/H). The start time will appear in the display (Figure 2c/A). After a few seconds it will go out and the current time will reappear. If you wish to cancel the selected start time, press the button for AUTO-START (Figure 2c/D). The green display for AUTO-START (Figure 2c/E) will go out. Important: If there is a brief power failure of up to 5 seconds the data remains stored. In the event of a longer power failure the entered data is erased and the time and start time must be reprogrammed as described above. Important: Once a start time has been programmed, your coffee machine will automatically start a brewing procedure every 24 hours as long as the display (green) for AUTO-START (Figure 2c/E) is illuminated. You can also use the “2-4 cups” aroma function when a start time is programmed! 0 Once the brewing procedure has been completed and you no longer require the warming plate function, switch the appliance off by pressing the on/off button again. The indicator will go out. Auto shut off Your coffee machine has a safety cutout. If the appliance is not used for 2 hours after the brewing procedure has started it switches off automatically for safety reasons and also to save energy. The indicator (red) (Figure c/F) will go out. g Cleaning the Coffee Machine 0 Remove the filter basket (Figure 1/J) to clean. It is particularly important to activate the anti-drip valve as it is rinsed so that coffee particles are removed thoroughly. Clean the appliance casing with a damp cloth, but never immerse it in water! You can wash the coffee jug and lid in a dishwasher. Descaling The service life of your coffee machine c...

Other models in this manual:
Coffee Makers - KF 2060 (240.37 kb)
Coffee Makers - KF 2061 AROMA (240.37 kb)
Coffee Makers - KF 2062 TIMER (240.37 kb)
Coffee Makers - KF 2061 AROMA (240.37 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category