Votes - 2, Average rating: 5
(
)
)
|
manual abstract
IMPORTANT: The container must be emptied regularly to prevent the formation of mould and bacteria. 1. Open the drawer A. 2. Remove the grille B. 3. Extract and empty the coffee grounds container C and the water container D. 4. Place the two containers and the grille back in their seats. 5. Close the drawer. 6. Press the key for about 3 seconds until you hear the beep of confi rmation. Now the machine is ready for use again. IMPORTANT: ALWAYS EMPTY THE GROUNDS CONTAINER 7 OPERATION AND USE SWITCH-ON Switch the machine on using the key After a few seconds, the following message appears on the display panel: Welcome message During the heating phase, the words COFFEE and WATER fl ash. The machine is ready for use only when they have stopped fl ashing. The display also shows the type of coffee selected (short/medium/ long) as well as the choice of making one or two coffees at the same time. PROGRAMMING THE MACHINE Various functions can be adjusted and programmed, as indicated below: To enter programming mode, with the machine off press the key for 3 seconds until the display panel shows: Use the keys to select the functions to be programmed, which are, in order of appearance: Pressing the key the display panel shows: Use the keys to set the hour. Initially the two digits related to the hour fl ash. COFFEE 1 SHORT WATER HELLO PROGRAMMING CLOCK 20:30 EEEnnnggggllliiiissshhh After setting the hour, press the key The two digits related to the minutes flash. Set the minutes by pressing the keys AUTOMATIC SWITCH-ON Press the key and the display panel shows: AUTO ON 07.30 Use the keys to set the time you want the machine to switch on automatically. Automatic switch-on can be activated or de-activated by pressing the key (with the machine off). The display will show an * next to the time AUTOMATIC SWITCH-OFF Press the key and the display panel shows: AUTO OFF 22.10 Use the keys to set the time you want the machine to switch off automatically. AUTO SHUT DOWN Press the key and the display panel shows: AUTO SHUT DOWN 15min Use the keys to set the minutes (15-30-45-60-75-90 min) after which the machine switches off automatically. 0=OFF. ENERGY SAVINGS Press the key and the display panel shows: ENERGY SAVINGS 15min Use the keys to set the minutes (15,30,45,60,75,90 min) after which the machine goes into “energy savings” mode. In this phase, the temperature of the water heater is lowered to reduce consumption. Press the key to restore the machine to a ready status quickly. DISPLAY LANGUAGE Press the key and the display panel shows: DISPLAY ITALIANO Use the keys to select the desired language. Available languages are English, Spanish, Italian, French and German. WATER HARDNESS Press the key the display panel shows: WATER HARDNESS 00°dh Use the keys to set the hardness of the water after using the special measuring kit to establish the correct number (0,5,10,15,20,25°dh) to be entered. (1°dh=1.786°F=1.250°e=17.86ppm=0.1786mmol/lt) DESCALING DESCALING 20Lt 50% The display shows the number of litres of water that have been dispensed and the theoretical level of lime scale build-up expressed as a percentage (100% indicates that you need to carry out descaling). This parameter is calculated based on the water hardness and the number of litres of water dispensed. The lime scale indicator will reset after a descaling cycle has been carried out. COFFEE COUNTER Press the key and the display panel shows: COFFEE 2240 The display indicates the number of coffees that have been made since the first use. This number is not resettable. GROUND COFFEE QUANTITY Press the key and the display panel shows: GROUND COFFEE 0 2626 ICT-01 ICT-01 E n g lis hEng lish Using the keys you can change and set the quantity of ground coffee to make the flavour of the coffee the desired strength. The scale of variation ranges from -5 to +5 (0.1 sec.). The 0 position corresponds to the optimal factory setting. COFFEE TEMPERATURE Press the key and the display panel shows: COFFEE TEMPERATURE 0 Using the keys you can change and set the temperature of the coffee. The scale of variation ranges from 14° to +50° F . The 0 position corresponds to the optimal factory setting. HOT WATER TEMPERATURE Press the key and the display panel shows: WATER TEMPERATURE 0 Using the keys you can change and set the temperature of the hot water. The scale of variation ranges from 14° to +50° F. The 0 position corresponds to the optimal factory setting. STEAM TEMPERATURE Press the key and the display panel shows: STEAM TEMPERATURE 0 Using the keys you can change and set the temperature of the steam. The scale of variation ranges 14° to +50° F. The 0 position corresponds to the optimal factory setting. Press the key to exit the programming function. SETTING THE GRIND A number of factors help you to understand whether the grinding level needs to be adjusted: • If the coffee is dispensed too quickly, this means that the beans have been ground too coarsely. • If the coffee comes out in slow dr...
Other models in this manual:Coffee Makers - Built-In Coffee Machine MQC-A10 US (6.74 mb)