Votes - , Average rating:
(
)
)
Manafacture: Capresso
File size: 110.62 kb
File name: inst_ctts.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
For details see chapter 10.2 & 11.1. f) Grind Volume Setting: the “2-10” button Please note: the CoffeeTEAM lets you set two different grinder settings: one for immediate use and one for Auto-On use. For both uses the default setting is “10”. For immediate use: Push the “2-10” button repeatedly to select from 2, 4, 6, 8, 10. For Auto-On use: Push and hold the PROG button until the word “AUTO” is displayed. Keep the PROG button depressed and then push the “2-10” button to select from 2, 4, 6, 8, 10. g) Strength Setting: the “AROMA” button. 8. Please note: the CoffeeTEAM lets you set two different “Aroma” REMINDER: Please make sure the “Happy Smile” symbol is settings: one for immediate use and one for Auto-On use. shown on page 10 on the final version. The display shows the “middle” bean (default setting). You can select a lighter or darker bean by pushing the “AROMA” button. The lighter bean will reduce the grinding time by one second, the darker bean will increase the grinding time by one second. The result will be a somewhat milder or stronger coffee. For Auto-On use: Push and hold the PROG button until the word “AUTO” is displayed. Keep the PROG button depressed and then push the AROMA button to make your selection. 9.2 COFFEE STRENGTH RECOMMENDATION In setting “10” with “AROMA” set to the dark bean, the machine will grind for about 40 seconds (producing the maximum amount of coffee). In setting “2” and “AROMA” set to the light bean, the machine grinds for about 7 seconds. • For 10 cups of strong coffee we recommend the setting 10 and the middle bean. • If the coffee tastes too strong, change the grinder setting to the number 8 or lower. • If the coffee is not strong enough, set the aroma setting to the darker bean. If the coffee is still not strong enough, reduce the amount of water. 9.3 POWER INTERRUPTION Flashing Display! If you unplug the coffee maker for more than 60 seconds or if you have a power failure, you will lose the current time and program settings. The flashing display indicates that you must reset the current and programmed time described in chapters 9.1 and 9.2. 9.4 SETTING THE GRINDER FINENESS / FILLING THE BEANS • Select the fineness setting (Fig. 4) by turning the bean container until the white triangle matches up with one of the five dots in front of the bean container. The largest dot to the right indicates the coarsest grind setting. • For first time use, use the coarsest setting – the largest dot. • For dark oily beans use the coarsest setting. For light, dry beans use the finer settings. Fill the bean container (Fig. 1.6) with beans. Make sure that the water container lid is closed to prevent beans from spilling into the water container. Caution: Check beans for foreign objects (page 6, chapter 4e). The bean container will hold approximately 150 grams of beans, good for two full pots of coffee in grinder setting 10. Note: Never fill the bean container with frozen or coated beans (chapters 4a and 4d, page 6). 9.5 FILLING THE WATER CONTAINER Open the water container lid (Fig. 1.7) and fill the water container with the desired amount of fresh, cold water. Please note: Never fill water above the 10-cup marking. The water container has an overflow opening in the back. 9.6 CHARCOAL WATER FILTRATION CoffeeTEAM comes with one charcoal cartridge and a charcoal filter holder. You can brew coffee with or without the water filtration system. Note: If you use distilled, spring or bottled water or if your water has little or no chlorine you may not find a difference in taste in 9. your coffee when using the water filtration system. However, most tap water is treated with chlorine. The water filter cartridge removes up to 82% of the chlorine found in your tap water. Initial Preparation: • Open the water container lid and remove the charcoal filter holder. • Remove the charcoal filter from poly bag. • Soak the filter in a glass with cold water for a few minutes. This will activate the filter. • Insert the cartridge into the charcoal filter holder (Fig. 12). • Place the charcoal filter holder back into the water tank. • Press the “Filter” button (Fig. 2) to activate the change filter reminder. The symbol • will appear. Please note: The filter reminder only functions when machine is plugged in and time has been set. When to replace the cartridge: • After 60 pots of coffee or 6 weeks after first use, the filter indicator button symbol • will blink, indicating it is time to change the filter. Unused cartridges can be stored indefinitely. • Replacement cartridges are available through your local Capresso dealer or by using the enclosed mail order form or through the website: 9.7 GOLD TONE FILTER AND FILTER INSERT • Push the Filter Release button (Fig. 1.11). The filter holder swings open. The Goldtone filter and the filter insert can be removed. • Before grinding/brewing coffee always make sure that the GoldTone filter is empty and placed into the filter insert. CAUTION/ DANGER! • N...