Login:
Votes - 3, Average rating: 4 ( )

User manual KitchenAid, model PROLINE 4KPCM050

Manafacture: KitchenAid
File size: 607.41 kb
File name: 4eb5d7f9-b177-42c5-94ec-045a8af52085.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


4. Once the minutes are set, turn the Program-Clock Switch clockwise to the “Clock” position, then release. The minute digits will stop flashing and the brew timer display will exit the clock-setting mode. FEATURES AND OPERATION 15 BREWING COFFEE Before brewing coffee for the first time, run the Coffee Maker through a complete brewing cycle without coffee. Use a full carafe of clean, cool water. This rinses the water reservoir, heat pump, and showerhead. This first brew cycle will yield slightly less water than the amount added, since the brew system retains a small amount of water. 1. Fill a carafe with enough fresh, cool water to make the desired amount of coffee. A graduated scale on the side of the carafe helps measure the amount of water required. The right side of the scale (“coffee”) is an accurate measurement of carafe volume in 41.4 ounce (125 ml) cups. The left side of the scale (“water”) indicates the amount of water needed to produce a given number of cups. (Brewing always produces less coffee than the volume of water added, since coffee grounds retain water.) NOTE: Use at least 4 cups (17 oz [500 ml]) of water to brew coffee. The Coffee Maker will not operate with less. 2. Remove the water guide cover and pour the water into the guide. The water level icons on the brew timer display will indicate whether the water reservoir is low, medium, or near full. 16 If message tones are enabled, the Coffee Maker will beep once when the water reservoir is near full. 3. After filling the reservoir, place the carafe on the Coffee Maker warming plate. 4. Grasp the brew basket handle and remove the brew basket from the front of the Coffee Maker. 5. Make certain the plastic brew basket insert is placed in the brew basket. Insert a 10–12 cup flat-bottom paper filter or the optional permanent filter into the brew basket. Using the included scoop, fill the filter with one rounded scoop of ground coffee for each cup desired. Add more coffee for a stronger brew, less for a weaker brew. Use a medium grind appropriate for automatic drip Coffee Makers: too fine a grind will produce bitterness and may cause water to overflow the brew basket. 6. Slide the brew basket into the Coffee Maker as far as possible. 7. To begin brewing, turn the Auto-On/Off Switch clockwise to the “On/Off” position, then release. The on/off indicator light will illuminate when the Coffee Maker is on. Do not remove the carafe from the Coffee Maker until brewing is complete. FEATURES AND OPERATION Continued… 17 BREWING COFFEE NOTE: The Coffee Maker cannot be switched on if there are fewer 9. Repeat steps 1–7 to brew additional carafes of coffee. Always than 4 cups (17 oz [500 ml]) of brew water in the reservoir. turn off the Coffee Maker and allow it to cool for five minutes before starting the next carafe. If message tones are enabled, the Coffee Maker will: • beep once if there are fewer than 4 cups (17 oz [500 ml]) of brew water in the reservoir • beep three times when brewing is complete 8. When brewing is finished, the 30, 60, 90, and 120-minute segments on the time since brewing display will light up to indicate the time elapsed since the completion of the brewing cycle. At the end of two hours, the Coffee Maker will shut off automatically. To shut off the Coffee Maker manually, turn the Auto-On/Off Switch clockwise to the “On/Off” position, then release. 18 USING THE WARMING PLATE Adjusting Warming Plate Temperature The warming plate can hold coffee at a choice of two serving temperatures. Turn the temperature switch clockwise to the “Low” position to preserve the flavor of coffee served at a leisurely pace. Turn the temperature switch counter-clockwise to the “High” position to keep coffee piping hot. Turning Off the Warming Plate The Coffee Maker warming plate is on whenever the on/off indicator light is illuminated. To shut off the Coffee Maker, turn the Auto-On/Off Switch clockwise to the “On/Off” position, then release. The Automatic Shutoff Feature The Coffee Maker warming plate will remain on for 2 hours after the last carafe is brewed, then automatically shut off. FEATURES AND OPERATION 19 PROGRAMMING THE AUTOMATIC BREW TIMER The KitchenAid® PRO LINE™ Series Coffee Maker can be programmed to brew coffee at a preset time, making it easy to wake up to fresh coffee every morning. T perform the following steps: 1. Enter the brew timer program mode by turning the Program-Clock Switch counter-clockwise to the “Prog” position, then releasing. The brew timer display background color will change from blue to red and the hour digits will begin to flash. The red background indicates program mode is active. 2. Press the “–” Timer Adjustment Button to decrease the hour or the “+” Timer Adjustment Button to increase the hour. If a Timer Adjustment Button is pressed and held, the hour digits will scroll. The AM and PM icons will change when the hour digits roll past “12”. Make certain the hour set is correct in regard to AM or PM. Timer Adjustmen...

Other models in this manual:
Coffee Makers - PROLINE 4KPCM050 (607.41 kb)
Coffee Makers - PROLINE 4KPCM050 (607.41 kb)
Coffee Makers - PROLINE 4KPCM050 (607.41 kb)
Coffee Makers - PROLINE 4KPCM050 (607.41 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category