Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
Do not leave the machine exposed to atmospheric agents (rain, sun, etc.) and do not install in damp rooms such as bathrooms. . In the event of parts replacement, request original spares from an authorized retailer or dealer. Erroneous installation may cause damage to people and things for which the manufacturer cannot be considered responsible. 2. DESCRIPTION 2.1 Features The machine is composed of a single structure for coffee grinding and dosage. The machine has a cast aluminium structure and plastic panelling. The coffee beans are held in a hopper fitted with a lid. When the machine is turned on, the grinding device under the hopper is activated. The ground coffee is collected in the front container, from where the coffee doses may by taken by activating a hand lever. 2.2 Protections All moving parts are inside the machine panelling. In the bean container 1 (Fig.3) a protection is fixed with screws to protect your hands when filling and cleaning the bean container. 2.3 Aerial noise In working place the noise level does not generally exceed 70dB(A). 2.4 Vibrations The machine is supplied with rubber vibration suppressing feet. In normal working conditions, the machine does not produce vibrations harmful to the operator and the environment. 2.5. Specifications and composition (Fig.3) Legend: 1 Bean container 2 Main and coffee grinding switch 3 Grinding button (SD) 4 Grinding adjustment button 5 Filter support 6 Ground coffee exit chute (SD) 7 Ground coffee dose lever 8 Ground coffee container 3. TECHNICAL DATA (Fig.4) Machine dimensions A=116 B =245 C=350mm. Packing dimensions A=230 B=340 C=410mm Packing volume 0,03 m3 Net weight 7 kg Gross weight with packing 7,5 kg No. of items 1 Grinder motor 1400W Electricity supply See label data Fig.1 Bean container capacity 300 gr. Gound coffe container capacity CA 200 gr. Working place temperature +5° +45° C 4. USE The machine has been designed to grind coffee. Any other use is to be considered unsuitable and therefore dangerous. The user must always follow the indications contained in this manual. In the case of a failure or if the machine is not working properly, switch it off and do not attempt any direct repair. Contact the assistance service. The user must not: . put his hands under the ground coffee container; . transport the machine or carry out maintenance operations with the plug connected and when the machine is warm; . pull the supply cable in order to disconnect the machine from the supply network; . use the machine if the supply cable is damaged; . touch the machine with wet or damp hands or feet; . wash the machine with water or vapour jet; . dip the machine in water or other liquid; . use the machine when there are children in its proximity; . allow the machine to be used by children or incapable person; . obstruct the suction or heat despersal grilles with cloths, ect.; . leave the side doors open; . place container with liquid on the machine It is forbidden to install or use the machine if it is be wet or damp. It is always necessary to request an accurate check by qualified personnel in order to find any possible damages to the electric components. 4.1. Counter-instructions This machine may be used only for the purposes for which it was designed. It cannot be used to dispense products other than coffee or any non food products. The manufacturer cannot be held responsible for any damage caused by unsuitable, erroneous or irrational use of the machine. 5. TRANSPORT 5.1. Packaging The machine must always be transported in a correct position following the instructions on the cardboard box. Do not turn over the machine or lay it down on a side. The box also contains separate accessories and a technical documentation which must be saved for further consultations. . Open the top part of the packaging, remove the accessories and then remove the machine from its packaging. . Check if the machine, the accessories, the electric cable and the plug are in perfect condition. Should one of these parts be damaged, immediately contact the retailer. The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must not be left within reach of children as they are potential sources of danger. Do not dispose of the packing elements in the environment; consign them to firms authorized for their disposal, 6. INSTALLATION The machine is delivered ready to be installed in accordance to the label data. Ensure that the electrical supply system has the same features as the machine. The electrical supply system must be equipped with a life saving device or a general automatic switch with an efficient earthing system. Should there be no electrical protection element, have a single-pole switch installed by qualified personnel, as envisaged by the current safety regulations with a contact opening distance of either equivalent or over 3 mm. The earthing of the appliance is compulsory. The constructor declines all responsibility in the event of the failure to ...
Other models in this manual:Coffee Grinders - ROCKY-SD (1019.76 kb)