Votes - 2, Average rating: 4.5 ( )

Manafacture: Jura Capresso File size: 628.31 kb File name: babc5fd7-cba8-4884-878d-28cd321ce367.pdf Language of manual:

This draw-off of espresso / strong coffee is only possible for 1 cup. 7.2 Drawing off espresso/extra coffee Place 1 cup under the coffee-spout (9) . Press the draw-off symbol until three dots light up to the left of the symbol. This draw-off of espresso / extra coffee is only possible forselector switch. The 1 cup. 7.3 Drawing off powder coffee Press the and symbols light up. Now put 1 or 2 level measuring spoons of pre-ground coffee into the filler funnel for pre-ground coffee (10). Place 1 or 2 cups under the coffee-spout (9) and press the required coffee key. Never use water-soluble instant coffee or quick coffee. We recommend that you only use powder from freshly ground coffee beans or pre-ground, vacuum-packed coffee. Never put more than 2 portions of coffee in. The filler funnel is not a storage container. If the draw-off key is pressed by mistake, the selection can be cancelled by pressing the draw-off key. Your machine rinses. After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned. 8. Drawing off steam The steam can be used for heating liquids and also for frothing milk for cappuccino. Make sure that the frothing aid (14) is pushed upwards when heating liquids. When frothing liquids, push the frothing aid downwards (Fig. 5). Place a cup under the pivoting nozzle for hot water/steam (13). Immerse the frothing aid (14) into the milk to be frothed or the liquid to be heated and turn the selector switch for hot water/steam (12) to the position. Immediately after this, press the maintenance key (4). When you have reached the required quantity of steam, turn the selector switch for hot water/steam (12) back to the position . The , symbols light up. If you would like to draw off a coffee immediately after the steam, please proceed as described in point 8.1. The max. draw-off time is about 8 minutes. A little water will come out first when frothing. It can be let off before actually drawing off steam. The good result, e.g. when frothing milk, is not influenced in any way. At the start of a steam draw-off, there can be splashes. The pivoting nozzle for hot water/steam gets hot. Please avoid direct contact with the skin. 8.1 Drawing off steam with the Profi-Auto-Cappuccino/Caffe Latte (optional E45) The Profi-Auto-Cappuccino/Caffe Latte is optionally available. Contact your authorized dealer. 8.2 Return to stand-by Place a vessel under the pivoting nozzle for hot water/steam (13). Press a draw-off key, the symbol lights up on the display. Turn the selector switch for hot water/steam (12) to the position . Draw water off until the flow of water is automatically interrupted and the symbol lights up. After this, turn the selector switch for hot water/steam (12) back to the position. After each steam draw-off, clean the pivoting nozzle with a damp cloth. 9. Drawing off hot water Place a cup under the pivoting nozzle for hot water/steam (13) and turn the selector switch for hot water/steam (12) to the symbol . The machine now produces hot water. To finish the process, turn the selector switch for hot water/ steam (12) back to the position. At the start of a water draw-off, there can be splashes. The pivoting nozzle for hot water/steam gets hot. Please avoid direct contact with the skin. 11 E 9.1 Drawing off hot water E45 Install the hot water nozzle to optain perfect water flow. This is included in your Welcome Pack. 10. Switching machine off When the machine is switched off, the rinsing programme is automatically started. Therefore, place an empty container under the coffee-spout and press the ON/OFF switch. When the rinsing water has run into the cup, the machine switches off. Throw the rinsing water away. 11. Care and maintenance 11.1 Fill water When the display lights up, no drawing-off is possible. Fill with water as described under point 3.3. 11.2 Empty grounds container The grounds container collects the coffee grounds. When this display lights up, no drawing-off is possible and the grounds container must be emptied. Push the coffee spout (9) up. Remove the drip tray. Be careful, as there is water in it. Empty and clean the drip tray and the grounds container (Fig. 6). Push the drip tray and then the grounds container back in (Fig. 7). The drip tray must also be emptied when you empty the grounds. 11.3 No drip tray If the symbol flashes, the drip tray has not been inserted properly. If the drip tray has not been put into the machine, you can clean the interior of the machine. Wipe out any coffee powder that might be in the machine with a damp cloth. Put the drip tray back in again. 11.4 Clean unit After 200 draw-offs or 160 rinses, the machine must be cleaned; the symbol flashing announces this. You can continue to draw off coffee or hot water/steam. We recommend carrying out the cleaning (as described in point 12) within the next few days. Warning lamp does not go out until the complete cleaning prozess has been carried out. 11.5 Unit scaled Scale i...

Download now

Please, enter two numbers from picture: